# New ports collection makefile for:	sylpheed-claws
# Date created:		3 January 2002
# Whom:			Simon 'corecode' Schubert <corecode@corecode.ath.cx>
#
# $FreeBSD: ports/mail/sylpheed-claws/Makefile,v 1.28 2003/02/24 02:56:34 edwin Exp $
#

PORTNAME=	sylpheed-claws
PORTVERSION=	0.8.10
CATEGORIES=	mail news ipv6
MASTER_SITES=	${MASTER_SITE_SOURCEFORGE}
MASTER_SITE_SUBDIR=	sylpheed-claws
DISTNAME=	sylpheed-${PORTVERSION}claws
DISTFILES=	${EXTRACT_ONLY} \
		${THEMEFILE}
EXTRACT_ONLY=	${DISTNAME}${EXTRACT_SUFX}

MAINTAINER=	corecode@corecode.ath.cx
COMMENT=	A lightweight and very featurefull GTK+ based e-mail and news client

LIB_DEPENDS=	intl.4:${PORTSDIR}/devel/gettext

THEMEVERSION=	0.8.7
THEMEFILE=	sylpheed-${THEMEVERSION}claws-iconset.tar.gz

USE_BZIP2=	yes
USE_GMAKE=	yes
USE_X_PREFIX=	yes
USE_LIBTOOL=	yes
USE_GTK=	yes
USE_REINPLACE=	yes

MAN1=		sylpheed-claws.1

CONFIGURE_ARGS=	--program-suffix="-claws" --enable-ipv6

CONFIGURE_ENV=	CFLAGS="${CFLAGS}" CPPFLAGS="${CPPFLAGS} -I${LOCALBASE}/include" \
		LIBS="-L${X11BASE}/lib -L${LOCALBASE}/lib"

.if defined(WITH_PIXBUF) || defined(WITH_ALL)
LIB_DEPENDS+=		gdk_pixbuf.2:${PORTSDIR}/graphics/gdk-pixbuf
CONFIGURE_ARGS+=	--disable-imlib
.else
USE_IMLIB=		yes
CONFIGURE_ARGS+=	--disable-gdk-pixbuf
.endif
.if defined(WITH_GPGME) || defined(WITH_ALL)
LIB_DEPENDS+=		gpgme.9:${PORTSDIR}/security/gpgme
RUN_DEPENDS+=		gpg:${PORTSDIR}/security/gnupg
CONFIGURE_ARGS+=	--enable-gpgme
.endif
.if defined(WITH_COMPFACE) || defined(WITH_ALL)
LIB_DEPENDS+=		compface.1:${PORTSDIR}/mail/faces
.else
CONFIGURE_ARGS+=	--disable-compface
.endif
.if defined(WITH_JCONV) || defined(WITH_ALL)
LIB_DEPENDS+=		jconv.0:${PORTSDIR}/japanese/libjconv
.else
CONFIGURE_ARGS+=	--disable-jconv
.endif
.if defined(WITH_ASPELL) || defined(WITH_ALL)
LIB_DEPENDS+=		pspell.15:${PORTSDIR}/textproc/aspell
CONFIGURE_ARGS+=	--enable-aspell
.endif
.if defined(WITH_JPILOT) || defined(WITH_ALL)
LIB_DEPENDS+=		pisock.8:${PORTSDIR}/palm/pilot-link
RUN_DEPENDS+=		jpilot:${PORTSDIR}/palm/jpilot
CONFIGURE_ARGS+=	--enable-jpilot
.endif
.if defined(WITH_LDAP) || defined(WITH_ALL)
LIB_DEPENDS+=		ldap.2:${PORTSDIR}/net/openldap20
CONFIGURE_ARGS+=	--enable-ldap
CONFIGURE_ENV+=		PTHREAD_LIBS=${PTHREAD_LIBS:S/"//g}
.endif
.if defined(WITH_SA_PLUG) || defined(WITH_ALL)
RUN_DEPENDS+=		spamd:${PORTSDIR}/mail/p5-Mail-SpamAssassin
CONFIGURE_ARGS+=	--enable-spamassassin-plugin
PLIST_SUB+=		SA_PLUG=""
.else
PLIST_SUB+=		SA_PLUG="@comment "
.endif
.if !defined(WITHOUT_SSL)
USE_OPENSSL=		yes
CONFIGURE_ARGS+=	--enable-openssl
.endif
.if defined(WITHOUT_THEMES)
PLIST_SUB+=	THEMES="@comment "
.else
PLIST_SUB+=	THEMES=""
.endif

pre-everything::
	@${ECHO} ""
	@${ECHO} "You may define the following build options:"
	@${ECHO} ""
	@${ECHO} "      WITH_ALL       Enable all options below"
	@${ECHO} ""
	@${ECHO} "      WITH_PIXBUF    Enable GDK Pixbuf support"
	@${ECHO} "      WITH_GPGME     Enable GnuPG support using GPGME"
	@${ECHO} "      WITH_COMPFACE  Enable compface (X-Face) support"
	@${ECHO} "      WITH_JCONV     Enable enhanced charset conversion"
	@${ECHO} "      WITH_ASPELL    Enable spell-checking support"
	@${ECHO} "      WITH_JPILOT    Enable JPilot support"
	@${ECHO} "      WITH_LDAP      Enable LDAP access support"
	@${ECHO} "      WITH_SA_PLUG   Build Spamassassin plugin"
	@${ECHO} ""
	@${ECHO} "      WITHOUT_SSL    Disable OpenSSL support"
	@${ECHO} "      WITHOUT_THEMES Don't install additional themes"
	@${ECHO} ""

post-extract:
.if !defined(WITHOUT_THEMES)
	@${MKDIR} ${WRKSRC}/themes
	@cd ${WRKDIR} && ${GZIP_CMD} ${EXTRACT_BEFORE_ARGS} ${_DISTDIR}/${THEMEFILE} ${EXTRACT_AFTER_ARGS}
.endif

post-patch:
	@${REINPLACE_CMD} -e "s|%%PREFIX%%|${PREFIX}|g" \
		${WRKSRC}/tools/README.sylprint ${WRKSRC}/tools/sylprint.pl
	@${REINPLACE_CMD} -e "s|po intl src|po src|" ${WRKSRC}/Makefile.in
	@for f in ${WRKSRC}/tools/*; do \
		${REINPLACE_CMD} -e "s|/usr/bin/perl|${PERL}|" $$f; done
.if defined(NOPORTDOCS)
	@${REINPLACE_CMD} -e 's|src manual faq tools|src tools|' ${WRKSRC}/Makefile.in
.endif

post-install:
.if !defined(NOPORTDOCS)
.for i in NEWS README README.jp README.claws RELEASE_NOTES.claws TODO TODO.jp tools/README.sylprint
	@${INSTALL_DATA} ${WRKSRC}/${i} ${DOCSDIR}
.endfor
	@${INSTALL_DATA} ${WRKSRC}/tools/README ${DOCSDIR}/README.tools
.endif
	@${MKDIR} ${DATADIR}
	@cd ${WRKSRC}/tools && \
		${INSTALL_SCRIPT} OOo2sylpheed.pl calypso_convert.pl \
		eud2gc.py filter_conv.pl gif2xface.pl google_msgid.pl \
		gpg-sign-syl kmail2sylpheed.pl kmail2sylpheed_v2.pl \
		launch_phoenix newscache_clean.pl outlook2sylpheed.pl \
		tb2sylpheed update-po uudec ${DATADIR}
.if !defined(WITHOUT_THEMES)
	@${MKDIR} ${DATADIR}/themes
	@cd ${WRKDIR}/${THEMEFILE:C/.tar.gz//} && for d in `find .`; do \
		if ${TEST} -d $${d}; then ${MKDIR} ${DATADIR}/themes/$${d}; else \
		${INSTALL_DATA} $${d} ${DATADIR}/themes/$${d}; fi; \
	done
.endif
	@${INSTALL_SCRIPT} ${WRKSRC}/tools/sylpheed-switcher ${PREFIX}/bin
	@${INSTALL_SCRIPT} ${WRKSRC}/tools/sylprint.pl ${PREFIX}/bin
	@${INSTALL_DATA} ${WRKSRC}/tools/sylprint.rc ${PREFIX}/etc/sylprint.rc.example
	@${MKDIR} ${PREFIX}/share/pixmaps
	@${INSTALL_DATA} ${WRKSRC}/sylpheed.png ${PREFIX}/share/pixmaps/sylpheed-claws.png

.include <bsd.port.mk>
