{$ifdef Delphi}
const fpcmakeini : array[0..213] of string[240]=(
{$else Delphi}
const fpcmakeini : array[0..213,1..240] of char=(
{$endif Delphi}
';'#010+
'; Templates used by fpcmake to create a Makefile from Makefile.fpc'#010+
';'#010+
#010+
'[defines]'#010+
'#####################################################################'#010+
'# Misc defines to be used by anyone'#010+
'####################################################','################'+
'#'#010+
#010+
'# OS categories'#010+
'BSDs = freebsd netbsd openbsd darwin'#010+
'UNIXs = linux $(BSDs) solaris qnx'#010+
'LIMIT83fs = go32v2 os2 emx watcom'#010+
#010+
'#Empty target for rules that always should run. Needed if'#010+
'#the target is non-phoney, and there is n','on-phony prereqisites.'#010+
'#Then add FORCE as an prerequisite'#010+
'#See gnu make manual: 4.7 Rules without Commands or Prerequisites'#010+
'FORCE:'#010+
'.PHONY: FORCE'#010+
#010+
'[osdetect]'#010+
'#####################################################################'#010+
'# Autodetect ','source OS (Linux or Dos or Windows NT or OS/2 or other)'+
#010+
'# define inUnix when running under Unix like environment'#010+
'# (Linux,FreeBSD,NetBSD,OpenBSD,Darwin,Cygwin)'#010+
'# define inWinNT when running under WinNT'#010+
'# define inOS2 when runn','ing under OS/2'#010+
'# define inCygwin when running under Cygwin32'#010+
'#####################################################################'#010+
#010+
'# We need only / in the path also remove the current dir,'#010+
'# also remove trailing /'#039's'#010+
'override PATH:=$(patsub','st %/,%,$(subst \,/,$(PATH)))'#010+
#010+
'# Detect unix'#010+
'# Darwin is handled specially'#010+
'ifneq ($(findstring darwin,$(OSTYPE)),)'#010+
'inUnix=1 #darwin'#010+
'SEARCHPATH:=$(filter-out .,$(subst :, ,$(PATH)))'#010+
'else'#010+
'# Determine if we'#039've a unix searchpath by looking for ','a ;'#010+
'# that normally doesn'#039't exists in the unix PATH var.'#010+
'ifeq ($(findstring ;,$(PATH)),)'#010+
'inUnix=1'#010+
'SEARCHPATH:=$(filter-out .,$(subst :, ,$(PATH)))'#010+
'else'#010+
'SEARCHPATH:=$(subst ;, ,$(PATH))'#010+
'endif'#010+
'endif'#010+
#010+
'# Add path were make is located'#010+
'SEARCHPATH','+=$(patsubst %/,%,$(subst \,/,$(dir $(MAKE))))'#010+
#010+
'# Search for PWD'#010+
'PWD:=$(strip $(wildcard $(addsuffix /pwd.exe,$(SEARCHPATH))))'#010+
'ifeq ($(PWD),)'#010+
'PWD:=$(strip $(wildcard $(addsuffix /pwd,$(SEARCHPATH))))'#010+
'ifeq ($(PWD),)'#010+
'$(error You need the GNU ','utils package to use this Makefile)'#010+
'else'#010+
'PWD:=$(firstword $(PWD))'#010+
'SRCEXEEXT='#010+
'endif'#010+
'else'#010+
'PWD:=$(firstword $(PWD))'#010+
'SRCEXEEXT=.exe'#010+
'endif'#010+
#010+
'# Detect NT - NT sets OS to Windows_NT'#010+
'# Detect OS/2 - OS/2 has OS2_SHELL defined'#010+
'ifndef inUnix'#010+
'ifeq ($(O','S),Windows_NT)'#010+
'inWinNT=1'#010+
'else'#010+
'ifdef OS2_SHELL'#010+
'inOS2=1'#010+
'endif'#010+
'endif'#010+
'else'#010+
'ifneq ($(findstring cygdrive,$(PATH)),)'#010+
'inCygWin=1'#010+
'endif'#010+
'endif'#010+
#010+
'# The extension of batch files / scripts'#010+
'ifdef inUnix'#010+
'SRCBATCHEXT=.sh'#010+
'else'#010+
'ifdef inOS2'#010+
'SRCBATCHEXT=.cmd'#010+
'e','lse'#010+
'SRCBATCHEXT=.bat'#010+
'endif'#010+
'endif'#010+
#010+
'# Path Separator, the subst trick is necessary for the \ that can'#039't'+
' exists'#010+
'# at the end of a line'#010+
'ifdef inUnix'#010+
'PATHSEP=/'#010+
'else'#010+
'PATHSEP:=$(subst /,\,/)'#010+
'# cygwin bash or sh can not handle backslashs'#010+
'ifdef inCy','gWin'#010+
'PATHSEP=/'#010+
'endif'#010+
'endif'#010+
#010+
'# Base dir'#010+
'ifdef PWD'#010+
'BASEDIR:=$(subst \,/,$(shell $(PWD)))'#010+
'# For Cygwin we need to replace /cygdrive/c/ with c:/'#010+
'ifdef inCygWin'#010+
'ifneq ($(findstring /cygdrive/,$(BASEDIR)),)'#010+
'BASENODIR:=$(patsubst /cygdrive%,%,$(BA','SEDIR))'#010+
'BASEDRIVE:=$(firstword $(subst /, ,$(BASENODIR)))'#010+
'BASEDIR:=$(subst /cygdrive/$(BASEDRIVE)/,$(BASEDRIVE):/,$(BASEDIR))'#010+
'endif'#010+
'endif'#010+
'else'#010+
'BASEDIR=.'#010+
'endif'#010+
#010+
'# Echo is an internal command under OS/2 (and others), so it'#039's alw'+
'ays found'#010+
'ifde','f inOS2'#010+
'ifndef ECHO'#010+
'ECHO:=$(strip $(wildcard $(addsuffix /gecho$(SRCEXEEXT),$(SEARCHPATH))'+
'))'#010+
'ifeq ($(ECHO),)'#010+
'ECHO:=$(strip $(wildcard $(addsuffix /echo$(SRCEXEEXT),$(SEARCHPATH)))'+
')'#010+
'ifeq ($(ECHO),)'#010+
'ECHO=echo'#010+
'else'#010+
'ECHO:=$(firstword $(ECHO))'#010+
'e','ndif'#010+
'else'#010+
'ECHO:=$(firstword $(ECHO))'#010+
'endif'#010+
'endif'#010+
'export ECHO'#010+
'endif'#010+
#010+
'[fpcdetect]'#010+
'#####################################################################'#010+
'# FPC Binary and Version Detection'#010+
'#######################################################','#############'+
'#'#010+
#010+
'# Compatibility with old makefiles'#010+
'ifndef FPC'#010+
'ifdef PP'#010+
'FPC=$(PP)'#010+
'endif'#010+
'endif'#010+
#010+
'# Try to detect the ppcXXX file to use by using "fpc -PB" option'#010+
'# to query for the default ppcXXX the fpc executable tries. When'#010+
'# fpc is not fou','nd use ppc386 by default. Also when fpc -PB gives'#010+
'# an error ppc386 will be used.'#010+
'ifndef FPC'#010+
'# check if fpc exists'#010+
'FPCPROG:=$(strip $(wildcard $(addsuffix /fpc$(SRCEXEEXT),$(SEARCHPATH)'+
')))'#010+
'ifneq ($(FPCPROG),)'#010+
'FPCPROG:=$(firstword $(FPCPROG)',')'#010+
'FPC:=$(shell $(FPCPROG) -PB)'#010+
'# Older fpc executables didn'#039't support it and return'#010+
'# Error: Illegal processor... If found then fallback to ppc386'#010+
'ifneq ($(findstring Error,$(FPC)),)'#010+
'override FPC=$(firstword $(strip $(wildcard $(addsuffix /','ppc386$(SRC'+
'EXEEXT),$(SEARCHPATH)))))'#010+
'endif'#010+
'else'#010+
'# fpc binary not found, fallback to ppc386'#010+
'override FPC=$(firstword $(strip $(wildcard $(addsuffix /ppc386$(SRCEX'+
'EEXT),$(SEARCHPATH)))))'#010+
'endif'#010+
'endif'#010+
#010+
'# Get a clean executable name'#010+
'override FPC',':=$(subst $(SRCEXEEXT),,$(FPC))'#010+
'override FPC:=$(subst \,/,$(FPC))$(SRCEXEEXT)'#010+
#010+
'# Try to find the binary direct first, otherwise in the path,'#010+
'# if not found give an error'#010+
'FOUNDFPC:=$(strip $(wildcard $(FPC)))'#010+
'ifeq ($(FOUNDFPC),)'#010+
'FOUNDFPC=$(s','trip $(wildcard $(addsuffix /$(FPC),$(SEARCHPATH))))'#010+
'ifeq ($(FOUNDFPC),)'#010+
'$(error Compiler $(FPC) not found)'#010+
'endif'#010+
'endif'#010+
#010+
'# For 1.1 and up we can use a single compiler call to retrieve'#010+
'# all needed information'#010+
'ifndef FPC_COMPILERINFO'#010+
'FPC_COM','PILERINFO:=$(shell $(FPC) -iVSPTPSOTO)'#010+
'endif'#010+
#010+
'# FPC version'#010+
'ifndef FPC_VERSION'#010+
'FPC_VERSION:=$(word 1,$(FPC_COMPILERINFO))'#010+
'endif'#010+
#010+
'export FPC FPC_VERSION FPC_COMPILERINFO'#010+
'# CHECKDEPEND should not be exported'#010+
'# This should limit multiple check','s'#010+
'unexport CHECKDEPEND ALLDEPENDENCIES'#010+
#010+
'#####################################################################'#010+
'# FPC Target Detection'#010+
'#####################################################################'#010+
#010+
'# Fall back to default values if nee','ded'#010+
'ifndef CPU_TARGET'#010+
'ifdef CPU_TARGET_DEFAULT'#010+
'CPU_TARGET=$(CPU_TARGET_DEFAULT)'#010+
'endif'#010+
'endif'#010+
'ifndef OS_TARGET'#010+
'ifdef OS_TARGET_DEFAULT'#010+
'OS_TARGET=$(OS_TARGET_DEFAULT)'#010+
'endif'#010+
'endif'#010+
#010+
'# For 1.0.x we need to use extra calls to retrieve all info'#010+
'ifn','eq ($(words $(FPC_COMPILERINFO)),5)'#010+
'FPC_COMPILERINFO+=$(shell $(FPC) -iSP)'#010+
'FPC_COMPILERINFO+=$(shell $(FPC) -iTP)'#010+
'FPC_COMPILERINFO+=$(shell $(FPC) -iSO)'#010+
'FPC_COMPILERINFO+=$(shell $(FPC) -iTO)'#010+
'endif'#010+
#010+
'# Retrieve Target/Source CPU and Target/S','ource OS'#010+
'ifndef CPU_SOURCE'#010+
'CPU_SOURCE:=$(word 2,$(FPC_COMPILERINFO))'#010+
'endif'#010+
'ifndef CPU_TARGET'#010+
'CPU_TARGET:=$(word 3,$(FPC_COMPILERINFO))'#010+
'endif'#010+
'ifndef OS_SOURCE'#010+
'OS_SOURCE:=$(word 4,$(FPC_COMPILERINFO))'#010+
'endif'#010+
'ifndef OS_TARGET'#010+
'OS_TARGET:=$(word ','5,$(FPC_COMPILERINFO))'#010+
'endif'#010+
'FULL_TARGET=$(CPU_TARGET)-$(OS_TARGET)'#010+
'FULL_SOURCE=$(CPU_SOURCE)-$(OS_SOURCE)'#010+
#010+
'# Full name of the target, including CPU and OS. For OSs limited'#010+
'# to 8.3 we only use the target OS'#010+
'ifneq ($(findstring $(OS_SOURCE)',',$(LIMIT83fs)),)'#010+
'TARGETSUFFIX=$(OS_TARGET)'#010+
'SOURCESUFFIX=$(OS_SOURCE)'#010+
'else'#010+
'TARGETSUFFIX=$(FULL_TARGET)'#010+
'SOURCESUFFIX=$(FULL_SOURCE)'#010+
'endif'#010+
#010+
'# Cross compile flag'#010+
'ifneq ($(FULL_TARGET),$(FULL_SOURCE))'#010+
'CROSSCOMPILE=1'#010+
'endif'#010+
#010+
'# Check if the Makefil','e supports this target, but not'#010+
'# when the make target is to rebuild the makefile'#010+
'ifeq ($(findstring makefile,$(MAKECMDGOALS)),)'#010+
'ifeq ($(findstring $(FULL_TARGET),$(MAKEFILETARGETS)),)'#010+
'$(error The Makefile doesn'#039't support target $(FULL_TARG','ET), plea'+
'se run fpcmake first)'#010+
'endif'#010+
'endif'#010+
#010+
#010+
'# Detect BSD, since BSD uses a slightly different directory hierarchy.'+
#010+
'ifneq ($(findstring $(OS_TARGET),$(BSDs)),)'#010+
'BSDhier=1'#010+
'endif'#010+
#010+
'# Detect Linux, will also use its own directory hierarchy.'#010+
'ifeq',' ($(OS_TARGET),linux)'#010+
'linuxHier=1'#010+
'endif'#010+
#010+
'export OS_TARGET OS_SOURCE CPU_TARGET CPU_SOURCE FULL_TARGET FULL_SOUR'+
'CE TARGETSUFFIX SOURCESUFFIX CROSSCOMPILE'#010+
#010+
#010+
'[fpcdircheckenv]'#010+
'####################################################################','#'+
#010+
'# FPCDIR Setting'#010+
'#####################################################################'#010+
#010+
'# Test FPCDIR to look if the RTL dir exists'#010+
'ifdef FPCDIR'#010+
'override FPCDIR:=$(subst \,/,$(FPCDIR))'#010+
'ifeq ($(wildcard $(addprefix $(FPCDIR)/,rtl units)),)',#010+
'override FPCDIR=wrong'#010+
'endif'#010+
'else'#010+
'override FPCDIR=wrong'#010+
'endif'#010+
#010+
'# Default FPCDIR from Makefile.fpc'#010+
'ifdef DEFAULT_FPCDIR'#010+
'ifeq ($(FPCDIR),wrong)'#010+
'override FPCDIR:=$(subst \,/,$(DEFAULT_FPCDIR))'#010+
'ifeq ($(wildcard $(addprefix $(FPCDIR)/,rtl units)','),)'#010+
'override FPCDIR=wrong'#010+
'endif'#010+
'endif'#010+
'endif'#010+
#010+
'[fpcdirdetect]'#010+
'# Detect FPCDIR'#010+
'ifeq ($(FPCDIR),wrong)'#010+
'ifdef inUnix'#010+
'override FPCDIR=/usr/local/lib/fpc/$(FPC_VERSION)'#010+
'ifeq ($(wildcard $(FPCDIR)/units),)'#010+
'override FPCDIR=/usr/lib/fpc/$(FPC_VERSION',')'#010+
'endif'#010+
'else'#010+
'override FPCDIR:=$(subst /$(FPC),,$(firstword $(strip $(wildcard $(add'+
'suffix /$(FPC),$(SEARCHPATH))))))'#010+
'override FPCDIR:=$(FPCDIR)/..'#010+
'ifeq ($(wildcard $(addprefix $(FPCDIR)/,rtl units)),)'#010+
'override FPCDIR:=$(FPCDIR)/..'#010+
'ifeq ($(w','ildcard $(addprefix $(FPCDIR)/,rtl units)),)'#010+
'override FPCDIR:=$(BASEDIR)'#010+
'ifeq ($(wildcard $(addprefix $(FPCDIR)/,rtl units)),)'#010+
'override FPCDIR=c:/pp'#010+
'endif'#010+
'endif'#010+
'endif'#010+
'endif'#010+
'endif'#010+
#010+
'# Cross binaries dir'#010+
'ifndef CROSSBINDIR'#010+
'CROSSBINDIR:=$(wildc','ard $(FPCDIR)/bin/$(TARGETSUFFIX))'#010+
'endif'#010+
#010+
'# Default binutils prefix for cross compile when the'#010+
'# crossbindir is not set'#010+
'ifndef BINUTILSPREFIX'#010+
'ifndef CROSSBINDIR'#010+
'ifdef CROSSCOMPILE'#010+
'BINUTILSPREFIX=$(CPU_TARGET)-$(OS_TARGET)-'#010+
'endif'#010+
'endif'#010+
'endif',#010+
#010+
'# Try first the full target name, otherwise try only'#010+
'# the OS for backwards compatibility'#010+
'UNITSDIR:=$(wildcard $(FPCDIR)/units/$(TARGETSUFFIX))'#010+
'ifeq ($(UNITSDIR),)'#010+
'UNITSDIR:=$(wildcard $(FPCDIR)/units/$(OS_TARGET))'#010+
'endif'#010+
#010+
'# Packages dir'#010+
'P','ACKAGESDIR:=$(wildcard $(FPCDIR) $(FPCDIR)/packages $(FPCDIR)/packa'+
'ges/base $(FPCDIR)/packages/extra)'#010+
#010+
#010+
'[shelltools]'#010+
'#####################################################################'#010+
'# Shell tools'#010+
'#######################################','#############################'+
'#'#010+
#010+
'# Echo that can redir (must be able run in the default OS shell)'#010+
'ifndef ECHOREDIR'#010+
'ifndef inUnix'#010+
'ECHOREDIR=echo'#010+
'else'#010+
'ECHOREDIR=$(ECHO)'#010+
'endif'#010+
'endif'#010+
#010+
'# To copy pograms'#010+
'ifndef COPY'#010+
'COPY:=$(CPPROG) -fp'#010+
'endif'#010+
#010+
'# Co','py a whole tree'#010+
'ifndef COPYTREE'#010+
'COPYTREE:=$(CPPROG) -Rfp'#010+
'endif'#010+
#010+
'# Copy a whole tree'#010+
'ifndef MKDIRTREE'#010+
'MKDIRTREE:=$(MKDIRPROG) -p'#010+
'endif'#010+
#010+
'# To move pograms'#010+
'ifndef MOVE'#010+
'MOVE:=$(MVPROG) -f'#010+
'endif'#010+
#010+
'# Check delete program'#010+
'ifndef DEL'#010+
'DEL:=$(RMPROG) ','-f'#010+
'endif'#010+
#010+
'# Check deltree program'#010+
'ifndef DELTREE'#010+
'DELTREE:=$(RMPROG) -rf'#010+
'endif'#010+
#010+
'# To install files'#010+
'ifndef INSTALL'#010+
'ifdef inUnix'#010+
'INSTALL:=$(GINSTALL) -c -m 644'#010+
'else'#010+
'INSTALL:=$(COPY)'#010+
'endif'#010+
'endif'#010+
#010+
'# To install programs'#010+
'ifndef INSTALLEXE'#010+
'ifdef in','Unix'#010+
'INSTALLEXE:=$(GINSTALL) -c -m 755'#010+
'else'#010+
'INSTALLEXE:=$(COPY)'#010+
'endif'#010+
'endif'#010+
#010+
'# To make a directory.'#010+
'ifndef MKDIR'#010+
'MKDIR:=$(GINSTALL) -m 755 -d'#010+
'endif'#010+
#010+
'export ECHOREDIR COPY COPYTREE MOVE DEL DELTREE INSTALL INSTALLEXE MKD'+
'IR'#010+
#010+
#010+
'[defaultdirs]'#010+
'##','##################################################################'+
'#'#010+
'# Default Directories'#010+
'#####################################################################'#010+
#010+
'# Units dir'#010+
'ifdef REQUIRE_UNITSDIR'#010+
'override UNITSDIR+=$(REQUIRE_UNITSDIR)'#010+
'endif',#010+
#010+
'# Units dir'#010+
'ifdef REQUIRE_PACKAGESDIR'#010+
'override PACKAGESDIR+=$(REQUIRE_PACKAGESDIR)'#010+
'endif'#010+
#010+
#010+
'# Unixes use unix dirs with /usr/bin, /usr/lib'#010+
'# When zipping use the target os default, when normal install then'#010+
'# use the source os as default'#010+
'if','def ZIPINSTALL'#010+
'# Zipinstall'#010+
'ifneq ($(findstring $(OS_TARGET),$(UNIXs)),)'#010+
'UNIXHier=1'#010+
'endif'#010+
'else'#010+
'# Normal install'#010+
'ifneq ($(findstring $(OS_SOURCE),$(UNIXs)),)'#010+
'UNIXHier=1'#010+
'endif'#010+
'endif'#010+
#010+
'# When install prefix is not set try to use prefix'#010+
'ifndef I','NSTALL_PREFIX'#010+
'ifdef PREFIX'#010+
'INSTALL_PREFIX=$(PREFIX)'#010+
'endif'#010+
'endif'#010+
#010+
'# set the prefix directory where to install everything'#010+
'ifndef INSTALL_PREFIX'#010+
'ifdef UNIXHier'#010+
'INSTALL_PREFIX=/usr/local'#010+
'else'#010+
'ifdef INSTALL_FPCPACKAGE'#010+
'INSTALL_BASEDIR:=/pp'#010+
'else'#010+
'I','NSTALL_BASEDIR:=/$(PACKAGE_NAME)'#010+
'endif'#010+
'endif'#010+
'endif'#010+
'export INSTALL_PREFIX'#010+
#010+
'# Export also INSTALL_SOURCESUBDIR set so it will be'#010+
'# used recursively for all subdirs'#010+
'ifdef INSTALL_FPCSUBDIR'#010+
'export INSTALL_FPCSUBDIR'#010+
'endif'#010+
#010+
'# Where to place the r','esulting zip files'#010+
'ifndef DIST_DESTDIR'#010+
'DIST_DESTDIR:=$(BASEDIR)'#010+
'endif'#010+
'export DIST_DESTDIR'#010+
#010+
'# EXE/PPU Target directories'#010+
'ifndef COMPILER_UNITTARGETDIR'#010+
'ifdef PACKAGEDIR_MAIN'#010+
'COMPILER_UNITTARGETDIR=$(PACKAGEDIR_MAIN)/units/$(TARGETSUFFIX)'#010+
'else',#010+
'COMPILER_UNITTARGETDIR=units/$(TARGETSUFFIX)'#010+
'endif'#010+
'endif'#010+
'ifndef COMPILER_TARGETDIR'#010+
'COMPILER_TARGETDIR=.'#010+
'endif'#010+
#010+
#010+
'#####################################################################'#010+
'# Install Directories'#010+
'###################################','#################################'+
'#'#010+
#010+
'# set the base directory where to install everything'#010+
'ifndef INSTALL_BASEDIR'#010+
'ifdef UNIXHier'#010+
'ifdef INSTALL_FPCPACKAGE'#010+
'INSTALL_BASEDIR:=$(INSTALL_PREFIX)/lib/fpc/$(FPC_VERSION)'#010+
'else'#010+
'INSTALL_BASEDIR:=$(INSTAL','L_PREFIX)/lib/$(PACKAGE_NAME)'#010+
'endif'#010+
'else'#010+
'INSTALL_BASEDIR:=$(INSTALL_PREFIX)'#010+
'endif'#010+
'endif'#010+
#010+
'# set the directory where to install the binaries'#010+
'ifndef INSTALL_BINDIR'#010+
'ifdef UNIXHier'#010+
'INSTALL_BINDIR:=$(INSTALL_PREFIX)/bin'#010+
'else'#010+
'INSTALL_BINDIR:=$(INS','TALL_BASEDIR)/bin'#010+
'# for FPC packages install the binaries under their target subdir'#010+
'ifdef INSTALL_FPCPACKAGE'#010+
'ifdef CROSSCOMPILE'#010+
'ifdef CROSSINSTALL'#010+
'INSTALL_BINDIR:=$(INSTALL_BINDIR)/$(SOURCESUFFIX)'#010+
'else'#010+
'INSTALL_BINDIR:=$(INSTALL_BINDIR)/$(TA','RGETSUFFIX)'#010+
'endif'#010+
'else'#010+
'INSTALL_BINDIR:=$(INSTALL_BINDIR)/$(TARGETSUFFIX)'#010+
'endif'#010+
'endif'#010+
'endif'#010+
'endif'#010+
#010+
'# set the directory where to install the units.'#010+
'ifndef INSTALL_UNITDIR'#010+
'INSTALL_UNITDIR:=$(INSTALL_BASEDIR)/units/$(TARGETSUFFIX)'#010+
'ifdef INSTALL','_FPCPACKAGE'#010+
'ifdef PACKAGE_NAME'#010+
'INSTALL_UNITDIR:=$(INSTALL_UNITDIR)/$(PACKAGE_NAME)'#010+
'endif'#010+
'endif'#010+
'endif'#010+
#010+
'# Where to install shared libraries'#010+
'ifndef INSTALL_LIBDIR'#010+
'ifdef UNIXHier'#010+
'INSTALL_LIBDIR:=$(INSTALL_PREFIX)/lib'#010+
'else'#010+
'INSTALL_LIBDIR:=$(INST','ALL_UNITDIR)'#010+
'endif'#010+
'endif'#010+
#010+
'# Where the source files will be stored'#010+
'ifndef INSTALL_SOURCEDIR'#010+
'ifdef UNIXHier'#010+
'ifdef BSDhier'#010+
'SRCPREFIXDIR=share/src'#010+
'else'#010+
'ifdef linuxHier'#010+
'SRCPREFIXDIR=share/src'#010+
'else'#010+
'SRCPREFIXDIR=src'#010+
'endif'#010+
'endif'#010+
'ifdef INSTALL_FPCPA','CKAGE'#010+
'ifdef INSTALL_FPCSUBDIR'#010+
'INSTALL_SOURCEDIR:=$(INSTALL_PREFIX)/$(SRCPREFIXDIR)/fpc-$(FPC_VERSION'+
')/$(INSTALL_FPCSUBDIR)/$(PACKAGE_NAME)'#010+
'else'#010+
'INSTALL_SOURCEDIR:=$(INSTALL_PREFIX)/$(SRCPREFIXDIR)/fpc-$(FPC_VERSION'+
')/$(PACKAGE_NAME)'#010+
'endif'#010+
'el','se'#010+
'INSTALL_SOURCEDIR:=$(INSTALL_PREFIX)/$(SRCPREFIXDIR)/$(PACKAGE_NAME)-$'+
'(PACKAGE_VERSION)'#010+
'endif'#010+
'else'#010+
'ifdef INSTALL_FPCPACKAGE'#010+
'ifdef INSTALL_FPCSUBDIR'#010+
'INSTALL_SOURCEDIR:=$(INSTALL_BASEDIR)/source/$(INSTALL_FPCSUBDIR)/$(PA'+
'CKAGE_NAME)'#010+
'else'#010+
'IN','STALL_SOURCEDIR:=$(INSTALL_BASEDIR)/source/$(PACKAGE_NAME)'#010+
'endif'#010+
'else'#010+
'INSTALL_SOURCEDIR:=$(INSTALL_BASEDIR)/source'#010+
'endif'#010+
'endif'#010+
'endif'#010+
#010+
'# Where the doc files will be stored'#010+
'ifndef INSTALL_DOCDIR'#010+
'ifdef UNIXHier'#010+
'ifdef BSDhier'#010+
'DOCPREFIXDIR=share','/doc'#010+
'else'#010+
'ifdef linuxHier'#010+
'DOCPREFIXDIR=share/doc'#010+
'else'#010+
'DOCPREFIXDIR=doc'#010+
'endif'#010+
'endif'#010+
'ifdef INSTALL_FPCPACKAGE'#010+
'INSTALL_DOCDIR:=$(INSTALL_PREFIX)/$(DOCPREFIXDIR)/fpc-$(FPC_VERSION)/$'+
'(PACKAGE_NAME)'#010+
'else'#010+
'INSTALL_DOCDIR:=$(INSTALL_PREFIX)/$(DOCPRE','FIXDIR)/$(PACKAGE_NAME)-$('+
'PACKAGE_VERSION)'#010+
'endif'#010+
'else'#010+
'ifdef INSTALL_FPCPACKAGE'#010+
'INSTALL_DOCDIR:=$(INSTALL_BASEDIR)/doc/$(PACKAGE_NAME)'#010+
'else'#010+
'INSTALL_DOCDIR:=$(INSTALL_BASEDIR)/doc'#010+
'endif'#010+
'endif'#010+
'endif'#010+
#010+
'# Where to install the examples, under linu','x we use the doc dir'#010+
'# because the copytree command will create a subdir itself'#010+
'ifndef INSTALL_EXAMPLEDIR'#010+
'ifdef UNIXHier'#010+
'ifdef INSTALL_FPCPACKAGE'#010+
#010+
'ifdef BSDhier'#010+
'INSTALL_EXAMPLEDIR:=$(INSTALL_PREFIX)/share/examples/fpc-$(FPC_VERSION'+
')/$(PACKA','GE_NAME)'#010+
'else'#010+
'ifdef linuxHier'#010+
'INSTALL_EXAMPLEDIR:=$(INSTALL_DOCDIR)/examples'#010+
'else'#010+
'INSTALL_EXAMPLEDIR:=$(INSTALL_PREFIX)/doc/fpc-$(FPC_VERSION)/examples/'+
'$(PACKAGE_NAME)'#010+
'endif'#010+
'endif'#010+
#010+
'else'#010+
#010+
'ifdef BSDhier'#010+
'INSTALL_EXAMPLEDIR:=$(INSTALL_PREFIX)/s','hare/examples/$(PACKAGE_NAME)'+
'-$(PACKAGE_VERSION)'#010+
'else'#010+
'ifdef linuxHier'#010+
'INSTALL_EXAMPLEDIR:=$(INSTALL_DOCDIR)/examples/$(PACKAGE_NAME)-$(PACKA'+
'GE_VERSION)'#010+
'else'#010+
'INSTALL_EXAMPLEDIR:=$(INSTALL_PREFIX)/doc/$(PACKAGE_NAME)-$(PACKAGE_VE'+
'RSION)'#010+
'endif'#010,
#010+
'endif'#010+
'endif'#010+
'else'#010+
'ifdef INSTALL_FPCPACKAGE'#010+
'INSTALL_EXAMPLEDIR:=$(INSTALL_BASEDIR)/examples/$(PACKAGE_NAME)'#010+
'else'#010+
'INSTALL_EXAMPLEDIR:=$(INSTALL_BASEDIR)/examples'#010+
'endif'#010+
'endif'#010+
'endif'#010+
#010+
'# Where the some extra (data)files will be stored'#010+
'ifndef INST','ALL_DATADIR'#010+
'INSTALL_DATADIR=$(INSTALL_BASEDIR)'#010+
'endif'#010+
#010+
'ifndef INSTALL_SHAREDDIR'#010+
'INSTALL_SHAREDDIR=$(INSTALL_PREFIX)/lib'#010+
'endif'#010+
#010+
'#####################################################################'#010+
'# Cross compile dirs'#010+
'#######################','#############################################'+
'#'#010+
#010+
'ifdef CROSSCOMPILE'#010+
'# Directory where the cross compile tools are stored.'#010+
'# First check if they are available in FPCDIR. If no targets/ subdir'#010+
'# is found use the targets/ subdir in INSTALL_BASE','DIR.'#010+
'ifndef CROSSBINDIR'#010+
'CROSSBINDIR:=$(wildcard $(CROSSTARGETDIR)/bin/$(SOURCESUFFIX))'#010+
'ifeq ($(CROSSBINDIR),)'#010+
'CROSSBINDIR:=$(wildcard $(INSTALL_BASEDIR)/cross/$(TARGETSUFFIX)/bin/$'+
'(FULL_SOURCE))'#010+
'endif'#010+
'endif'#010+
'else'#010+
'CROSSBINDIR='#010+
'endif'#010+
#010+
#010+
'[dirlib','c]'#010+
'# On linux, try to find where libgcc.a is.'#010+
'ifeq ($(OS_SOURCE),linux)'#010+
#010+
'# Amd64 to i386?'#010+
'ifndef GCCLIBDIR'#010+
'ifeq ($(CPU_TARGET),i386)'#010+
'ifneq ($(findstring x86_64,$(shell uname -a)),)'#010+
'ifeq ($(BINUTILSPREFIX),)'#010+
'GCCLIBDIR:=$(shell dirname `gcc -','m32 -print-libgcc-file-name`)'#010+
'endif'#010+
'endif'#010+
'endif'#010+
'ifeq ($(CPU_TARGET),powerpc64)'#010+
'ifeq ($(BINUTILSPREFIX),)'#010+
'GCCLIBDIR:=$(shell dirname `gcc -m64 -print-libgcc-file-name`)'#010+
'endif'#010+
'endif'#010+
'endif'#010+
#010+
'# Try cross gcc'#010+
'ifndef GCCLIBDIR'#010+
'CROSSGCC=$(strip $(w','ildcard $(addsuffix /$(BINUTILSPREFIX)gcc$(SRCEX'+
'EEXT),$(SEARCHPATH))))'#010+
'ifneq ($(CROSSGCC),)'#010+
'GCCLIBDIR:=$(shell dirname `$(CROSSGCC) -print-libgcc-file-name`)'#010+
'endif'#010+
'endif'#010+
#010+
'# Other libraries from ld.so.conf'#010+
'ifndef OTHERLIBDIR'#010+
'OTHERLIBDIR:=$(s','hell grep -v "^\#" /etc/ld.so.conf | awk '#039'{ ORS='+
'" "; print $1 }'#039')'#010+
'endif'#010+
'endif'#010+
#010+
'ifdef inUnix'#010+
'ifeq ($(OS_SOURCE),netbsd)'#010+
'OTHERLIBDIR+=/usr/pkg/lib'#010+
'endif'#010+
'export GCCLIBDIR OTHERLIB'#010+
'endif'#010+
#010+
#010+
'[extensions]'#010+
'##########################################','##########################'+
'#'#010+
'# Default extensions'#010+
'#####################################################################'#010+
#010+
'# Default needed extensions (Go32v2,Linux)'#010+
'BATCHEXT=.bat'#010+
'LOADEREXT=.as'#010+
'EXEEXT=.exe'#010+
'PPLEXT=.ppl'#010+
'PPUEXT=.ppu'#010+
'OEXT=.o'#010+
'ASMEX','T=.s'#010+
'SMARTEXT=.sl'#010+
'STATICLIBEXT=.a'#010+
'SHAREDLIBEXT=.so'#010+
'SHAREDLIBPREFIX=libfp'#010+
'STATICLIBPREFIX=libp'#010+
'IMPORTLIBPREFIX=libimp'#010+
'RSTEXT=.rst'#010+
'#DEBUGSYMEXT #for debugger symbol files, define only for targets which'+
' has this'#010+
#010+
'# 1.0.x has target specific ex','tensions for ppu files and objects'#010+
'ifeq ($(findstring 1.0.,$(FPC_VERSION)),)'#010+
'# short version for 1.1 and above - no target specific extensions'#010+
#010+
'# Go32v1'#010+
'ifeq ($(OS_TARGET),go32v1)'#010+
'STATICLIBPREFIX='#010+
'SHORTSUFFIX=v1'#010+
'endif'#010+
#010+
'# Go32v2'#010+
'ifeq ($(OS_T','ARGET),go32v2)'#010+
'STATICLIBPREFIX='#010+
'SHORTSUFFIX=dos'#010+
'endif'#010+
#010+
'# watcom'#010+
'ifeq ($(OS_TARGET),watcom)'#010+
'STATICLIBPREFIX='#010+
'OEXT=.obj'#010+
'ASMEXT=.asm'#010+
'SHAREDLIBEXT=.dll'#010+
'SHORTSUFFIX=wat'#010+
'endif'#010+
#010+
'# Linux'#010+
'ifeq ($(OS_TARGET),linux)'#010+
'BATCHEXT=.sh'#010+
'EXEEXT='#010+
'HASSHAREDLIB=1',#010+
'SHORTSUFFIX=lnx'#010+
'endif'#010+
#010+
'# FreeBSD'#010+
'ifeq ($(OS_TARGET),freebsd)'#010+
'BATCHEXT=.sh'#010+
'EXEEXT='#010+
'HASSHAREDLIB=1'#010+
'SHORTSUFFIX=fbs'#010+
'endif'#010+
#010+
'# NetBSD'#010+
'ifeq ($(OS_TARGET),netbsd)'#010+
'BATCHEXT=.sh'#010+
'EXEEXT='#010+
'HASSHAREDLIB=1'#010+
'SHORTSUFFIX=nbs'#010+
'endif'#010+
#010+
'# OpenBSD'#010+
'ifeq ($(OS_TAR','GET),openbsd)'#010+
'BATCHEXT=.sh'#010+
'EXEEXT='#010+
'HASSHAREDLIB=1'#010+
'SHORTSUFFIX=obs'#010+
'endif'#010+
#010+
'# Win32'#010+
'ifeq ($(OS_TARGET),win32)'#010+
'SHAREDLIBEXT=.dll'#010+
'SHORTSUFFIX=w32'#010+
'endif'#010+
#010+
'# OS/2'#010+
'ifeq ($(OS_TARGET),os2)'#010+
'BATCHEXT=.cmd'#010+
'AOUTEXT=.out'#010+
'STATICLIBPREFIX='#010+
'SHAREDLIBEXT=.dll',#010+
'SHORTSUFFIX=os2'#010+
'ECHO=echo'#010+
'endif'#010+
#010+
'# EMX'#010+
'ifeq ($(OS_TARGET),emx)'#010+
'BATCHEXT=.cmd'#010+
'AOUTEXT=.out'#010+
'STATICLIBPREFIX='#010+
'SHAREDLIBEXT=.dll'#010+
'SHORTSUFFIX=emx'#010+
'ECHO=echo'#010+
'endif'#010+
#010+
'# Amiga'#010+
'ifeq ($(OS_TARGET),amiga)'#010+
'EXEEXT='#010+
'SHAREDLIBEXT=.library'#010+
'SHORTSUFFIX=amg'#010+
'e','ndif'#010+
#010+
'# MorphOS'#010+
'ifeq ($(OS_TARGET),morphos)'#010+
'EXEEXT='#010+
'SHAREDLIBEXT=.library'#010+
'SHORTSUFFIX=mos'#010+
'endif'#010+
#010+
'# Atari'#010+
'ifeq ($(OS_TARGET),atari)'#010+
'EXEEXT=.ttp'#010+
'SHORTSUFFIX=ata'#010+
'endif'#010+
#010+
'# BeOS'#010+
'ifeq ($(OS_TARGET),beos)'#010+
'BATCHEXT=.sh'#010+
'EXEEXT='#010+
'SHORTSUFFIX=be'#010+
'endif'#010,
#010+
'# Solaris'#010+
'ifeq ($(OS_TARGET),solaris)'#010+
'BATCHEXT=.sh'#010+
'EXEEXT='#010+
'SHORTSUFFIX=sun'#010+
'endif'#010+
#010+
'# QNX'#010+
'ifeq ($(OS_TARGET),qnx)'#010+
'BATCHEXT=.sh'#010+
'EXEEXT='#010+
'SHORTSUFFIX=qnx'#010+
'endif'#010+
#010+
'# Netware clib'#010+
'ifeq ($(OS_TARGET),netware)'#010+
'EXEEXT=.nlm'#010+
'STATICLIBPREFIX='#010+
'SHORTSUFFIX','=nw'#010+
'endif'#010+
#010+
'# Netware libc'#010+
'ifeq ($(OS_TARGET),netwlibc)'#010+
'EXEEXT=.nlm'#010+
'STATICLIBPREFIX='#010+
'SHORTSUFFIX=nwl'#010+
'endif'#010+
#010+
'# MacOS'#010+
'ifeq ($(OS_TARGET),macos)'#010+
'BATCHEXT='#010+
'EXEEXT='#010+
'DEBUGSYMEXT=.xcoff'#010+
'SHORTSUFFIX=mac'#010+
'endif'#010+
#010+
'# Darwin'#010+
'ifeq ($(OS_TARGET),darwin)'#010+
'BAT','CHEXT=.sh'#010+
'EXEEXT='#010+
'HASSHAREDLIB=1'#010+
'SHORTSUFFIX=dwn'#010+
'endif'#010+
#010+
'# gba'#010+
'ifeq ($(OS_TARGET),gba)'#010+
'EXEEXT=.gba'#010+
'SHAREDLIBEXT=.so'#010+
'SHORTSUFFIX=gba'#010+
'endif'#010+
#010+
'# Symbian OS'#010+
'ifeq ($(OS_TARGET),symbian)'#010+
'SHAREDLIBEXT=.dll'#010+
'SHORTSUFFIX=symbian'#010+
'endif'#010+
#010+
'else'#010+
'# long vers','ion for 1.0.x - target specific extensions'#010+
#010+
'# Go32v1'#010+
'ifeq ($(OS_TARGET),go32v1)'#010+
'PPUEXT=.pp1'#010+
'OEXT=.o1'#010+
'ASMEXT=.s1'#010+
'SMARTEXT=.sl1'#010+
'STATICLIBEXT=.a1'#010+
'SHAREDLIBEXT=.so1'#010+
'STATICLIBPREFIX='#010+
'SHORTSUFFIX=v1'#010+
'endif'#010+
#010+
'# Go32v2'#010+
'ifeq ($(OS_TARGET),go32v2)'#010+
'STAT','ICLIBPREFIX='#010+
'SHORTSUFFIX=dos'#010+
'endif'#010+
#010+
'# watcom'#010+
'ifeq ($(OS_TARGET),watcom)'#010+
'STATICLIBPREFIX='#010+
'SHORTSUFFIX=wat'#010+
'endif'#010+
#010+
'# Linux'#010+
'ifeq ($(OS_TARGET),linux)'#010+
'BATCHEXT=.sh'#010+
'EXEEXT='#010+
'HASSHAREDLIB=1'#010+
'SHORTSUFFIX=lnx'#010+
'endif'#010+
#010+
'# FreeBSD'#010+
'ifeq ($(OS_TARGET),freebs','d)'#010+
'BATCHEXT=.sh'#010+
'EXEEXT='#010+
'HASSHAREDLIB=1'#010+
'SHORTSUFFIX=fbs'#010+
'endif'#010+
#010+
'# NetBSD'#010+
'ifeq ($(OS_TARGET),netbsd)'#010+
'BATCHEXT=.sh'#010+
'EXEEXT='#010+
'HASSHAREDLIB=1'#010+
'SHORTSUFFIX=nbs'#010+
'endif'#010+
#010+
'# OpenBSD'#010+
'ifeq ($(OS_TARGET),openbsd)'#010+
'BATCHEXT=.sh'#010+
'EXEEXT='#010+
'HASSHAREDLIB=1'#010+
'SHORTSUFF','IX=obs'#010+
'endif'#010+
#010+
'# Win32'#010+
'ifeq ($(OS_TARGET),win32)'#010+
'PPUEXT=.ppw'#010+
'OEXT=.ow'#010+
'ASMEXT=.sw'#010+
'SMARTEXT=.slw'#010+
'STATICLIBEXT=.aw'#010+
'SHAREDLIBEXT=.dll'#010+
'SHORTSUFFIX=w32'#010+
'endif'#010+
#010+
'# OS/2'#010+
'ifeq ($(OS_TARGET),os2)'#010+
'BATCHEXT=.cmd'#010+
'PPUEXT=.ppo'#010+
'ASMEXT=.so2'#010+
'OEXT=.oo2'#010+
'AOUTEXT=.','out'#010+
'SMARTEXT=.sl2'#010+
'STATICLIBPREFIX='#010+
'STATICLIBEXT=.ao2'#010+
'SHAREDLIBEXT=.dll'#010+
'SHORTSUFFIX=os2'#010+
'ECHO=echo'#010+
'endif'#010+
#010+
'# Amiga'#010+
'ifeq ($(OS_TARGET),amiga)'#010+
'EXEEXT='#010+
'PPUEXT=.ppu'#010+
'ASMEXT=.s'#010+
'OEXT=.o'#010+
'SMARTEXT=.sl'#010+
'STATICLIBEXT=.a'#010+
'SHAREDLIBEXT=.library'#010+
'SHORTSUFFIX=a','mg'#010+
'endif'#010+
#010+
'# Atari'#010+
'ifeq ($(OS_TARGET),atari)'#010+
'PPUEXT=.ppu'#010+
'ASMEXT=.s'#010+
'OEXT=.o'#010+
'SMARTEXT=.sl'#010+
'STATICLIBEXT=.a'#010+
'EXEEXT=.ttp'#010+
'SHORTSUFFIX=ata'#010+
'endif'#010+
#010+
'# BeOS'#010+
'ifeq ($(OS_TARGET),beos)'#010+
'BATCHEXT=.sh'#010+
'PPUEXT=.ppu'#010+
'ASMEXT=.s'#010+
'OEXT=.o'#010+
'SMARTEXT=.sl'#010+
'STATICLIBEXT=.','a'#010+
'EXEEXT='#010+
'SHORTSUFFIX=be'#010+
'endif'#010+
#010+
'# Solaris'#010+
'ifeq ($(OS_TARGET),solaris)'#010+
'BATCHEXT=.sh'#010+
'PPUEXT=.ppu'#010+
'ASMEXT=.s'#010+
'OEXT=.o'#010+
'SMARTEXT=.sl'#010+
'STATICLIBEXT=.a'#010+
'EXEEXT='#010+
'SHORTSUFFIX=sun'#010+
'endif'#010+
#010+
'# QNX'#010+
'ifeq ($(OS_TARGET),qnx)'#010+
'BATCHEXT=.sh'#010+
'PPUEXT=.ppu'#010+
'ASMEXT=.s'#010+
'OE','XT=.o'#010+
'SMARTEXT=.sl'#010+
'STATICLIBEXT=.a'#010+
'EXEEXT='#010+
'SHORTSUFFIX=qnx'#010+
'endif'#010+
#010+
'# Netware'#010+
'ifeq ($(OS_TARGET),netware)'#010+
'STATICLIBPREFIX='#010+
'PPUEXT=.ppu'#010+
'OEXT=.o'#010+
'ASMEXT=.s'#010+
'SMARTEXT=.sl'#010+
'STATICLIBEXT=.a'#010+
'SHAREDLIBEXT=.nlm'#010+
'EXEEXT=.nlm'#010+
'SHORTSUFFIX=nw'#010+
'endif'#010+
#010+
'# Netwar','e libc'#010+
'ifeq ($(OS_TARGET),netwlibc)'#010+
'STATICLIBPREFIX='#010+
'PPUEXT=.ppu'#010+
'OEXT=.o'#010+
'ASMEXT=.s'#010+
'SMARTEXT=.sl'#010+
'STATICLIBEXT=.a'#010+
'SHAREDLIBEXT=.nlm'#010+
'EXEEXT=.nlm'#010+
'SHORTSUFFIX=nwl'#010+
'endif'#010+
#010+
'# MacOS'#010+
'ifeq ($(OS_TARGET),macos)'#010+
'BATCHEXT='#010+
'PPUEXT=.ppu'#010+
'ASMEXT=.s'#010+
'OEXT=.o'#010+
'S','MARTEXT=.sl'#010+
'STATICLIBEXT=.a'#010+
'EXEEXT='#010+
'DEBUGSYMEXT=.xcoff'#010+
'SHORTSUFFIX=mac'#010+
'endif'#010+
#010+
'#end of target specific settings'#010+
'endif'#010+
#010+
'# For 8.3 limited OS'#039's the short suffixes'#010+
'# Otherwise use the full source/target names'#010+
'ifneq ($(findstring $(OS_SOURCE),$(','LIMIT83fs)),)'#010+
'FPCMADE=fpcmade.$(SHORTSUFFIX)'#010+
'ZIPSUFFIX=$(SHORTSUFFIX)'#010+
'ZIPCROSSPREFIX='#010+
'ZIPSOURCESUFFIX=src'#010+
'ZIPEXAMPLESUFFIX=exm'#010+
'else'#010+
'FPCMADE=fpcmade.$(TARGETSUFFIX)'#010+
'ZIPSOURCESUFFIX=.source'#010+
'ZIPEXAMPLESUFFIX=.examples'#010+
'ifdef CROSSCOMPILE'#010+
'ZIPSUF','FIX=.$(SOURCESUFFIX)'#010+
'ZIPCROSSPREFIX=$(TARGETSUFFIX)-'#010+
'else'#010+
'ZIPSUFFIX=.$(TARGETSUFFIX)'#010+
'ZIPCROSSPREFIX='#010+
'endif'#010+
'endif'#010+
#010+
'[defaulttools]'#010+
'#####################################################################'#010+
'# Default Tools'#010+
'#########################','###########################################'+
'#'#010+
#010+
'# Names of the binutils tools'#010+
'ASNAME=$(BINUTILSPREFIX)as'#010+
'LDNAME=$(BINUTILSPREFIX)ld'#010+
'ARNAME=$(BINUTILSPREFIX)ar'#010+
'RCNAME=$(BINUTILSPREFIX)rc'#010+
'ifneq ($(findstring 1.0.,$(FPC_VERSION)),)'#010+
'ifeq ($(OS_TA','RGET),win32)'#010+
'ifeq ($(CROSSBINDIR),)'#010+
'ASNAME=asw'#010+
'LDNAME=ldw'#010+
'ARNAME=arw'#010+
'endif'#010+
'endif'#010+
'endif'#010+
#010+
'# assembler, redefine it if cross compiling'#010+
'ifndef ASPROG'#010+
'ifdef CROSSBINDIR'#010+
'ASPROG=$(CROSSBINDIR)/$(ASNAME)$(SRCEXEEXT)'#010+
'else'#010+
'ASPROG=$(ASNAME)'#010+
'endif'#010+
'endi','f'#010+
#010+
'# linker, but probably not used'#010+
'ifndef LDPROG'#010+
'ifdef CROSSBINDIR'#010+
'LDPROG=$(CROSSBINDIR)/$(LDNAME)$(SRCEXEEXT)'#010+
'else'#010+
'LDPROG=$(LDNAME)'#010+
'endif'#010+
'endif'#010+
#010+
'# Resource compiler'#010+
'ifndef RCPROG'#010+
'ifdef CROSSBINDIR'#010+
'RCPROG=$(CROSSBINDIR)/$(RCNAME)$(SRCEXEEXT',')'#010+
'else'#010+
'RCPROG=$(RCNAME)'#010+
'endif'#010+
'endif'#010+
#010+
'# Archiver'#010+
'ifndef ARPROG'#010+
'ifdef CROSSBINDIR'#010+
'ARPROG=$(CROSSBINDIR)/$(ARNAME)$(SRCEXEEXT)'#010+
'else'#010+
'ARPROG=$(ARNAME)'#010+
'endif'#010+
'endif'#010+
#010+
'# Override defaults'#010+
'AS=$(ASPROG)'#010+
'LD=$(LDPROG)'#010+
'RC=$(RCPROG)'#010+
'AR=$(ARPROG)'#010+
#010+
'# ppas.b','at / ppas.sh'#010+
'PPAS=ppas$(SRCBATCHEXT)'#010+
#010+
'# ldconfig to rebuild .so cache'#010+
'ifdef inUnix'#010+
'LDCONFIG=ldconfig'#010+
'else'#010+
'LDCONFIG='#010+
'endif'#010+
#010+
'ifdef DATE'#010+
'DATESTR:=$(shell $(DATE) +%Y%m%d)'#010+
'else'#010+
'DATESTR='#010+
'endif'#010+
#010+
'# Look if UPX is found for go32v2 and win32. We can',#039't use $UPX bec'+
'uase'#010+
'# upx uses that one itself (PFV)'#010+
'ifndef UPXPROG'#010+
'ifeq ($(OS_TARGET),go32v2)'#010+
'UPXPROG:=1'#010+
'endif'#010+
'ifeq ($(OS_TARGET),win32)'#010+
'UPXPROG:=1'#010+
'endif'#010+
'ifdef UPXPROG'#010+
'UPXPROG:=$(strip $(wildcard $(addsuffix /upx$(SRCEXEEXT),$(SEARCHPATH)'+
')','))'#010+
'ifeq ($(UPXPROG),)'#010+
'UPXPROG='#010+
'else'#010+
'UPXPROG:=$(firstword $(UPXPROG))'#010+
'endif'#010+
'else'#010+
'UPXPROG='#010+
'endif'#010+
'endif'#010+
'export UPXPROG'#010+
#010+
'# Zip options'#010+
'ZIPOPT=-9'#010+
'ZIPEXT=.zip'#010+
#010+
'# Tar options'#010+
'ifeq ($(USETAR),bz2)'#010+
'TAROPT=vj'#010+
'TAREXT=.tar.bz2'#010+
'else'#010+
'TAROPT=vz'#010+
'TAREXT=.ta','r.gz'#010+
'endif'#010+
#010+
#010+
'[command_begin]'#010+
'#####################################################################'#010+
'# Compiler Command Line'#010+
'#####################################################################'#010+
#010+
'# Load commandline OPTDEF and add FPC_CPU defi','ne, for compiling the'#010+
'# compiler this needs to be turned off'#010+
'ifndef NOCPUDEF'#010+
'override FPCOPTDEF=$(CPU_TARGET)'#010+
'endif'#010+
#010+
#010+
'# Load commandline OPT and add target and unit dir to be sure'#010+
'ifneq ($(OS_TARGET),$(OS_SOURCE))'#010+
'override FPCOPT+=-T$(OS_TA','RGET)'#010+
'endif'#010+
#010+
'ifneq ($(CPU_TARGET),$(CPU_SOURCE))'#010+
'override FPCOPT+=-P$(CPU_TARGET)'#010+
'endif'#010+
#010+
'ifeq ($(OS_SOURCE),openbsd)'#010+
'override FPCOPT+=-FD$(NEW_BINUTILS_PATH)'#010+
'endif'#010+
#010+
'ifndef CROSSBOOTSTRAP'#010+
'ifneq ($(BINUTILSPREFIX),)'#010+
'override FPCOPT+=-XP$(BINU','TILSPREFIX) '#010+
'endif'#010+
'ifneq ($(BINUTILSPREFIX),)'#010+
'override FPCOPT+=-Xr$(RLINKPATH)'#010+
'endif'#010+
'endif'#010+
#010+
'# User dirs should be first, so they are looked at first'#010+
'ifdef UNITDIR'#010+
'override FPCOPT+=$(addprefix -Fu,$(UNITDIR))'#010+
'endif'#010+
'ifdef LIBDIR'#010+
'override FPCO','PT+=$(addprefix -Fl,$(LIBDIR))'#010+
'endif'#010+
'ifdef OBJDIR'#010+
'override FPCOPT+=$(addprefix -Fo,$(OBJDIR))'#010+
'endif'#010+
'ifdef INCDIR'#010+
'override FPCOPT+=$(addprefix -Fi,$(INCDIR))'#010+
'endif'#010+
#010+
'# Smartlinking'#010+
'ifdef LINKSMART'#010+
'override FPCOPT+=-XX'#010+
'endif'#010+
#010+
'# Smartlinking cr','eation'#010+
'ifdef CREATESMART'#010+
'override FPCOPT+=-CX'#010+
'endif'#010+
#010+
'# Debug'#010+
'ifdef DEBUG'#010+
'override FPCOPT+=-gl'#010+
'override FPCOPTDEF+=DEBUG'#010+
'endif'#010+
#010+
'# Release mode'#010+
'# (strip, optimize and don'#039't load fpc.cfg)'#010+
'# fpc 2.1 has -O2 for all targets'#010+
'ifdef RELEASE'#010+
'ifneq (','$(findstring 2.0.,$(FPC_VERSION)),)'#010+
'ifeq ($(CPU_TARGET),i386)'#010+
'FPCCPUOPT:=-OG2p3'#010+
'endif'#010+
'ifeq ($(CPU_TARGET),powerpc)'#010+
'FPCCPUOPT:=-O1r'#010+
'endif'#010+
'else'#010+
'FPCCPUOPT:=-O2'#010+
'endif'#010+
'override FPCOPT+=-Ur -Xs $(FPCCPUOPT) -n'#010+
'override FPCOPTDEF+=RELEASE'#010+
'endif'#010+
#010+
'#',' Strip'#010+
'ifdef STRIP'#010+
'override FPCOPT+=-Xs'#010+
'endif'#010+
#010+
'# Optimizer'#010+
'ifdef OPTIMIZE'#010+
'override FPCOPT+=-O2'#010+
'endif'#010+
#010+
'# Verbose settings (warning,note,info)'#010+
'ifdef VERBOSE'#010+
'override FPCOPT+=-vwni'#010+
'endif'#010+
#010+
'# Needed compiler options'#010+
'ifdef COMPILER_OPTIONS'#010+
'overri','de FPCOPT+=$(COMPILER_OPTIONS)'#010+
'endif'#010+
'ifdef COMPILER_UNITDIR'#010+
'override FPCOPT+=$(addprefix -Fu,$(COMPILER_UNITDIR))'#010+
'endif'#010+
'ifdef COMPILER_LIBRARYDIR'#010+
'override FPCOPT+=$(addprefix -Fl,$(COMPILER_LIBRARYDIR))'#010+
'endif'#010+
'ifdef COMPILER_OBJECTDIR'#010+
'overri','de FPCOPT+=$(addprefix -Fo,$(COMPILER_OBJECTDIR))'#010+
'endif'#010+
'ifdef COMPILER_INCLUDEDIR'#010+
'override FPCOPT+=$(addprefix -Fi,$(COMPILER_INCLUDEDIR))'#010+
'endif'#010+
#010+
'# Cross compiler utils'#010+
'ifdef CROSSBINDIR'#010+
'override FPCOPT+=-FD$(CROSSBINDIR)'#010+
'endif'#010+
#010+
'# Target di','rs and the prefix to use for clean/install'#010+
'ifdef COMPILER_TARGETDIR'#010+
'override FPCOPT+=-FE$(COMPILER_TARGETDIR)'#010+
'ifeq ($(COMPILER_TARGETDIR),.)'#010+
'override TARGETDIRPREFIX='#010+
'else'#010+
'override TARGETDIRPREFIX=$(COMPILER_TARGETDIR)/'#010+
'endif'#010+
'endif'#010+
#010+
'# Unit ','target dir (default is units/<cpu>-<os>/'#010+
'ifdef COMPILER_UNITTARGETDIR'#010+
'override FPCOPT+=-FU$(COMPILER_UNITTARGETDIR)'#010+
'ifeq ($(COMPILER_UNITTARGETDIR),.)'#010+
'override UNITTARGETDIRPREFIX='#010+
'else'#010+
'override UNITTARGETDIRPREFIX=$(COMPILER_UNITTARGETDIR)','/'#010+
'endif'#010+
'else'#010+
'ifdef COMPILER_TARGETDIR'#010+
'override COMPILER_UNITTARGETDIR=$(COMPILER_TARGETDIR)'#010+
'override UNITTARGETDIRPREFIX=$(TARGETDIRPREFIX)'#010+
'endif'#010+
'endif'#010+
#010+
'ifdef CREATESHARED'#010+
'override FPCOPT+=-Cg'#010+
#010+
'ifeq ($(CPU_TARGET),i386)'#010+
'override FPCOPT+=-Aa','s'#010+
'endif'#010+
#010+
'endif'#010+
#010+
'# create always pic'#039'ed code on x86_64'#010+
'ifeq ($(findstring 2.0.,$(FPC_VERSION)),)'#010+
'ifeq ($(OS_TARGET),linux)'#010+
'ifeq ($(CPU_TARGET),x86_64)'#010+
'override FPCOPT+=-Cg'#010+
'endif'#010+
'endif'#010+
'endif'#010+
#010+
'ifdef LINKSHARED'#010+
'#!!! deactived for testing overri','de FPCOPT+=-XD'#010+
'endif'#010+
#010+
#010+
'[command_libc]'#010+
'# Add GCC lib path if asked'#010+
'ifdef GCCLIBDIR'#010+
'override FPCOPT+=-Fl$(GCCLIBDIR)'#010+
'endif'#010+
'ifdef OTHERLIBDIR'#010+
'override FPCOPT+=$(addprefix -Fl,$(OTHERLIBDIR))'#010+
'endif'#010+
#010+
#010+
'[command_end]'#010+
'# Add commandline options last',' so they can override'#010+
'ifdef OPT'#010+
'override FPCOPT+=$(OPT)'#010+
'endif'#010+
#010+
'# Add defines from FPCOPTDEF to FPCOPT'#010+
'ifdef FPCOPTDEF'#010+
'override FPCOPT+=$(addprefix -d,$(FPCOPTDEF))'#010+
'endif'#010+
#010+
'# Was a config file specified ?'#010+
'ifdef CFGFILE'#010+
'override FPCOPT+=@$(CFG','FILE)'#010+
'endif'#010+
#010+
'# Use the environment to pass commandline options?'#010+
'ifdef USEENV'#010+
'override FPCEXTCMD:=$(FPCOPT)'#010+
'override FPCOPT:=!FPCEXTCMD'#010+
'export FPCEXTCMD'#010+
'endif'#010+
#010+
'override AFULL_TARGET=$(CPU_TARGET)-$(OS_TARGET)'#010+
'override AFULL_SOURCE=$(CPU_SOUR','CE)-$(OS_SOURCE)'#010+
#010+
'ifneq ($(AFULL_TARGET),$(AFULL_SOURCE))'#010+
'override ACROSSCOMPILE=1'#010+
'endif'#010+
#010+
'ifdef ACROSSCOMPILE'#010+
'override FPCOPT+=$(CROSSOPT)'#010+
'endif'#010+
#010+
'# Compiler commandline'#010+
'override COMPILER:=$(FPC) $(FPCOPT)'#010+
#010+
'# also call ppas if with command o','ption -s'#010+
'# but only if the FULL_SOURCE and FULL_TARGET are equal'#010+
'ifeq (,$(findstring -s ,$(COMPILER)))'#010+
'EXECPPAS='#010+
'else'#010+
'ifeq ($(FULL_SOURCE),$(FULL_TARGET))'#010+
'EXECPPAS:=@$(PPAS)'#010+
'endif'#010+
'endif'#010+
#010+
#010+
'[loaderrules]'#010+
'######################################','##############################'+
'#'#010+
'# Loaders'#010+
'#####################################################################'#010+
#010+
'.PHONY: fpc_loaders'#010+
#010+
'ifneq ($(TARGET_LOADERS),)'#010+
'override ALLTARGET+=fpc_loaders'#010+
'override CLEANTARGET+=fpc_loaders_clean'#010+
'overrid','e INSTALLTARGET+=fpc_loaders_install'#010+
#010+
'override LOADEROFILES:=$(addsuffix $(OEXT),$(TARGET_LOADERS))'#010+
'endif'#010+
#010+
'%$(OEXT): %$(LOADEREXT)'#010+
'ifdef COMPILER_UNITTARGETDIR'#010+
' $(AS) -o $(COMPILER_UNITTARGETDIR)/$*$(OEXT) $<'#010+
'else'#010+
' $(AS) -o $*','$(OEXT) $<'#010+
'endif'#010+
#010+
'fpc_loaders: $(COMPILER_UNITTARGETDIR) $(LOADEROFILES)'#010+
#010+
'fpc_loaders_clean:'#010+
'ifdef COMPILER_UNITTARGETDIR'#010+
' -$(DEL) $(addprefix $(COMPILER_UNITTARGETDIR)/,$(LOADEROFILES)'+
')'#010+
'else'#010+
' -$(DEL) $(LOADEROFILES)'#010+
'endif'#010+
#010+
'fp','c_loaders_install:'#010+
' $(MKDIR) $(INSTALL_UNITDIR)'#010+
'ifdef COMPILER_UNITTARGETDIR'#010+
' $(INSTALL) $(addprefix $(COMPILER_UNITTARGETDIR)/,$(LOADEROFIL'+
'ES)) $(INSTALL_UNITDIR)'#010+
'else'#010+
' $(INSTALL) $(LOADEROFILES) $(INSTALL_UNITDIR)'#010+
'end','if'#010+
#010+
#010+
'[unitrules]'#010+
'#####################################################################'#010+
'# Units'#010+
'#####################################################################'#010+
#010+
'.PHONY: fpc_units'#010+
#010+
'ifneq ($(TARGET_UNITS),)'#010+
'override ALLTARGET+=fpc_units'#010,
#010+
'override UNITPPUFILES=$(addsuffix $(PPUEXT),$(TARGET_UNITS))'#010+
'override IMPLICITUNITPPUFILES=$(addsuffix $(PPUEXT),$(TARGET_IMPLICITU'+
'NITS))'#010+
'override INSTALLPPUFILES+=$(UNITPPUFILES) $(IMPLICITUNITPPUFILES)'#010+
'override CLEANPPUFILES+=$(UNITPPUFI','LES) $(IMPLICITUNITPPUFILES)'#010+
'endif'#010+
#010+
'fpc_units: $(COMPILER_UNITTARGETDIR) $(UNITPPUFILES)'#010+
#010+
#010+
'[exerules]'#010+
'#####################################################################'#010+
'# Exes'#010+
'#############################################################','#######'+
'#'#010+
#010+
'.PHONY: fpc_exes'#010+
#010+
'# Programs are not needed for a cross installation'#010+
'ifndef CROSSINSTALL'#010+
'ifneq ($(TARGET_PROGRAMS),)'#010+
'override EXEFILES=$(addsuffix $(EXEEXT),$(TARGET_PROGRAMS))'#010+
'override EXEOFILES:=$(addsuffix $(OEXT),$(TARGET_PROG','RAMS)) $(addpre'+
'fix $(STATICLIBPREFIX),$(addsuffix $(STATICLIBEXT),$(TARGET_PROGRAMS))'+
') $(addprefix $(IMPORTLIBPREFIX),$(addsuffix $(STATICLIBEXT),$(TARGET_'+
'PROGRAMS)))'#010+
#010+
'override ALLTARGET+=fpc_exes'#010+
'override INSTALLEXEFILES+=$(EXEFILES)'#010+
'overr','ide CLEANEXEFILES+=$(EXEFILES) $(EXEOFILES)'#010+
'ifeq ($(OS_TARGET),os2)'#010+
'override CLEANEXEFILES+=$(addsuffix $(AOUTEXT),$(TARGET_PROGRAMS))'#010+
'endif'#010+
'ifeq ($(OS_TARGET),emx)'#010+
'override CLEANEXEFILES+=$(addsuffix $(AOUTEXT),$(TARGET_PROGRAMS))'#010+
'endif'#010+
'en','dif'#010+
'endif'#010+
#010+
'fpc_exes: $(COMPILER_TARGETDIR) $(COMPILER_UNITTARGETDIR) $(EXEFILES)'#010+
#010+
#010+
'[rstrules]'#010+
'#####################################################################'#010+
'# Resource strings'#010+
'#########################################################','###########'+
'#'#010+
#010+
'ifdef TARGET_RSTS'#010+
'override RSTFILES=$(addsuffix $(RSTEXT),$(TARGET_RSTS))'#010+
#010+
'override CLEANRSTFILES+=$(RSTFILES)'#010+
'endif'#010+
#010+
#010+
'[examplerules]'#010+
'#####################################################################'#010+
'# Examples'#010+
'###########','#########################################################'+
'#'#010+
#010+
'.PHONY: fpc_examples'#010+
#010+
'ifneq ($(TARGET_EXAMPLES),)'#010+
'HASEXAMPLES=1'#010+
'override EXAMPLESOURCEFILES:=$(wildcard $(addsuffix .pp,$(TARGET_EXAMP'+
'LES)) $(addsuffix .pas,$(TARGET_EXAMPLES)) $(a','ddsuffix .lpr,$(TARGET'+
'_EXAMPLES)) $(addsuffix .dpr,$(TARGET_EXAMPLES)))'#010+
'override EXAMPLEFILES:=$(addsuffix $(EXEEXT),$(TARGET_EXAMPLES))'#010+
'override EXAMPLEOFILES:=$(addsuffix $(OEXT),$(TARGET_EXAMPLES)) $(addp'+
'refix $(STATICLIBPREFIX),$(addsuf','fix $(STATICLIBEXT),$(TARGET_EXAMPL'+
'ES))) $(addprefix $(IMPORTLIBPREFIX),$(addsuffix $(STATICLIBEXT),$(TAR'+
'GET_EXAMPLES)))'#010+
#010+
'override CLEANEXEFILES+=$(EXAMPLEFILES) $(EXAMPLEOFILES)'#010+
'ifeq ($(OS_TARGET),os2)'#010+
'override CLEANEXEFILES+=$(addsuffix $','(AOUTEXT),$(TARGET_EXAMPLES))'#010+
'endif'#010+
'ifeq ($(OS_TARGET),emx)'#010+
'override CLEANEXEFILES+=$(addsuffix $(AOUTEXT),$(TARGET_EXAMPLES))'#010+
'endif'#010+
'endif'#010+
'ifneq ($(TARGET_EXAMPLEDIRS),)'#010+
'HASEXAMPLES=1'#010+
'endif'#010+
#010+
'fpc_examples: all $(EXAMPLEFILES) $(addsuffix _al','l,$(TARGET_EXAMPLED'+
'IRS))'#010+
#010+
#010+
'[compilerules]'#010+
'#####################################################################'#010+
'# General compile rules'#010+
'#####################################################################'#010+
#010+
'.PHONY: fpc_all fpc_smart fpc_deb','ug fpc_release fpc_shared'#010+
#010+
'$(FPCMADE): $(ALLDEPENDENCIES) $(ALLTARGET)'#010+
' @$(ECHOREDIR) Compiled > $(FPCMADE)'#010+
#010+
'fpc_all: $(FPCMADE)'#010+
#010+
'fpc_smart:'#010+
' $(MAKE) all LINKSMART=1 CREATESMART=1'#010+
#010+
'fpc_debug:'#010+
' $(MAKE) all DEBUG=1'#010+
#010+
'fpc_r','elease:'#010+
' $(MAKE) all RELEASE=1'#010+
#010+
'# General compile rules, available for both possible .pp and .pas exte'+
'nsions'#010+
#010+
'.SUFFIXES: $(EXEEXT) $(PPUEXT) $(OEXT) .pas .lpr .dpr .pp .rc .res'#010+
#010+
'$(COMPILER_UNITTARGETDIR):'#010+
' $(MKDIRTREE) $(COMPI','LER_UNITTARGETDIR)'#010+
#010+
'$(COMPILER_TARGETDIR):'#010+
' $(MKDIRTREE) $(COMPILER_TARGETDIR)'#010+
#010+
'%$(PPUEXT): %.pp'#010+
' $(COMPILER) $<'#010+
' $(EXECPPAS)'#010+
#010+
'%$(PPUEXT): %.pas'#010+
' $(COMPILER) $<'#010+
' $(EXECPPAS)'#010+
#010+
'%$(EXEEXT): %.pp'#010+
' $(COM','PILER) $<'#010+
' $(EXECPPAS)'#010+
#010+
'%$(EXEEXT): %.pas'#010+
' $(COMPILER) $<'#010+
' $(EXECPPAS)'#010+
#010+
'%$(EXEEXT): %.lpr'#010+
' $(COMPILER) $<'#010+
' $(EXECPPAS)'#010+
#010+
'%$(EXEEXT): %.dpr'#010+
' $(COMPILER) $<'#010+
' $(EXECPPAS)'#010+
#010+
'%.res: %.rc'#010+
' win','dres -i $< -o $@'#010+
#010+
'# Search paths for .ppu, .pp, .pas, .lpr, .dpr'#010+
'vpath %.pp $(COMPILER_SOURCEDIR) $(COMPILER_INCLUDEDIR)'#010+
'vpath %.pas $(COMPILER_SOURCEDIR) $(COMPILER_INCLUDEDIR)'#010+
'vpath %.lpr $(COMPILER_SOURCEDIR) $(COMPILER_INCLUDEDIR)'#010+
'vpath',' %.dpr $(COMPILER_SOURCEDIR) $(COMPILER_INCLUDEDIR)'#010+
'vpath %.inc $(COMPILER_INCLUDEDIR)'#010+
'vpath %$(OEXT) $(COMPILER_UNITTARGETDIR)'#010+
'vpath %$(PPUEXT) $(COMPILER_UNITTARGETDIR)'#010+
#010+
'[sharedrules]'#010+
'######################################################','##############'+
'#'#010+
'# Library'#010+
'#####################################################################'#010+
#010+
'.PHONY: fpc_shared'#010+
#010+
'override INSTALLTARGET+=fpc_shared_install'#010+
#010+
'ifndef SHARED_LIBVERSION'#010+
'SHARED_LIBVERSION=$(FPC_VERSION)'#010+
'endif'#010+
#010+
'ifndef SHARED_','LIBNAME'#010+
'SHARED_LIBNAME=$(PACKAGE_NAME)'#010+
'endif'#010+
#010+
'ifndef SHARED_FULLNAME'#010+
'SHARED_FULLNAME=$(SHAREDLIBPREFIX)$(SHARED_LIBNAME)-$(SHARED_LIBVERSIO'+
'N)$(SHAREDLIBEXT)'#010+
'endif'#010+
#010+
'# Default sharedlib units are all unit objects'#010+
'ifndef SHARED_LIBUNITS'#010+
'SHARED','_LIBUNITS:=$(TARGET_UNITS) $(TARGET_IMPLICITUNITS)'#010+
'override SHARED_LIBUNITS:=$(filter-out $(INSTALL_BUILDUNIT),$(SHARED_L'+
'IBUNITS))'#010+
'endif'#010+
#010+
'fpc_shared:'#010+
'ifdef HASSHAREDLIB'#010+
' $(MAKE) all CREATESHARED=1 LINKSHARED=1 CREATESMART=1'#010+
'ifneq ($(','SHARED_BUILD),n)'#010+
' $(PPUMOVE) -q $(SHARED_LIBUNITS) -i$(COMPILER_UNITTARGETDIR) -'+
'o$(SHARED_FULLNAME) -d$(COMPILER_UNITTARGETDIR)'#010+
'endif'#010+
'else'#010+
' @$(ECHO) Shared Libraries not supported'#010+
'endif'#010+
#010+
'fpc_shared_install:'#010+
'ifneq ($(SHARED_BUI','LD),n)'#010+
'ifneq ($(SHARED_LIBUNITS),)'#010+
'ifneq ($(wildcard $(COMPILER_UNITTARGETDIR)/$(SHARED_FULLNAME)),)'#010+
' $(INSTALL) $(COMPILER_UNITTARGETDIR)/$(SHARED_FULLNAME) $(INST'+
'ALL_SHAREDDIR)'#010+
'endif'#010+
'endif'#010+
'endif'#010+
#010+
'[installrules]'#010+
'####################','################################################'+
'#'#010+
'# Install rules'#010+
'#####################################################################'#010+
#010+
'.PHONY: fpc_install fpc_sourceinstall fpc_exampleinstall'#010+
#010+
'ifdef INSTALL_UNITS'#010+
'override INSTALLPPUFILES+','=$(addsuffix $(PPUEXT),$(INSTALL_UNITS))'#010+
'endif'#010+
#010+
'ifdef INSTALL_BUILDUNIT'#010+
'override INSTALLPPUFILES:=$(filter-out $(INSTALL_BUILDUNIT)$(PPUEXT),$'+
'(INSTALLPPUFILES))'#010+
'endif'#010+
#010+
'ifdef INSTALLPPUFILES'#010+
'override INSTALLPPULINKFILES:=$(subst $(PPUEXT),$(','OEXT),$(INSTALLPPU'+
'FILES)) $(addprefix $(STATICLIBPREFIX),$(subst $(PPUEXT),$(STATICLIBEX'+
'T),$(INSTALLPPUFILES))) $(addprefix $(IMPORTLIBPREFIX),$(subst $(PPUEX'+
'T),$(STATICLIBEXT),$(INSTALLPPUFILES)))'#010+
'ifneq ($(UNITTARGETDIRPREFIX),)'#010+
'override I','NSTALLPPUFILES:=$(addprefix $(UNITTARGETDIRPREFIX),$(notdi'+
'r $(INSTALLPPUFILES)))'#010+
'override INSTALLPPULINKFILES:=$(wildcard $(addprefix $(UNITTARGETDIRPR'+
'EFIX),$(notdir $(INSTALLPPULINKFILES))))'#010+
'endif'#010+
'# Implicitly install Package.fpc'#010+
'override ','INSTALL_CREATEPACKAGEFPC=1'#010+
'endif'#010+
#010+
'ifdef INSTALLEXEFILES'#010+
'ifneq ($(TARGETDIRPREFIX),)'#010+
'override INSTALLEXEFILES:=$(addprefix $(TARGETDIRPREFIX),$(notdir $(IN'+
'STALLEXEFILES)))'#010+
'endif'#010+
'endif'#010+
#010+
'fpc_install: all $(INSTALLTARGET)'#010+
'ifdef INSTALLEXEFILES'#010,
' $(MKDIR) $(INSTALL_BINDIR)'#010+
'# Compress the exes if upx is defined'#010+
'ifdef UPXPROG'#010+
' -$(UPXPROG) $(INSTALLEXEFILES)'#010+
'endif'#010+
' $(INSTALLEXE) $(INSTALLEXEFILES) $(INSTALL_BINDIR)'#010+
'endif'#010+
'ifdef INSTALL_CREATEPACKAGEFPC'#010+
'ifdef FPCMAK','E'#010+
'# If the fpcpackage variable is set then create and install Package.fp'+
'c,'#010+
'# a safety check is done if Makefile.fpc is available'#010+
'ifdef PACKAGE_VERSION'#010+
'ifneq ($(wildcard Makefile.fpc),)'#010+
' $(FPCMAKE) -p -T$(CPU_TARGET)-$(OS_TARGET) Make','file.fpc'#010+
' $(MKDIR) $(INSTALL_UNITDIR)'#010+
' $(INSTALL) Package.fpc $(INSTALL_UNITDIR)'#010+
'endif'#010+
'endif'#010+
'endif'#010+
'endif'#010+
'ifdef INSTALLPPUFILES'#010+
' $(MKDIR) $(INSTALL_UNITDIR)'#010+
' $(INSTALL) $(INSTALLPPUFILES) $(INSTALL_UNITDIR)'#010+
'ifneq ','($(INSTALLPPULINKFILES),)'#010+
' $(INSTALL) $(INSTALLPPULINKFILES) $(INSTALL_UNITDIR)'#010+
'endif'#010+
'ifneq ($(wildcard $(LIB_FULLNAME)),)'#010+
' $(MKDIR) $(INSTALL_LIBDIR)'#010+
' $(INSTALL) $(LIB_FULLNAME) $(INSTALL_LIBDIR)'#010+
'ifdef inUnix'#010+
' l','n -sf $(LIB_FULLNAME) $(INSTALL_LIBDIR)/$(LIB_NAME)'#010+
'endif'#010+
'endif'#010+
'endif'#010+
'ifdef INSTALL_FILES'#010+
' $(MKDIR) $(INSTALL_DATADIR)'#010+
' $(INSTALL) $(INSTALL_FILES) $(INSTALL_DATADIR)'#010+
'endif'#010+
#010+
'fpc_sourceinstall: distclean'#010+
' $(MKDIR) $(INST','ALL_SOURCEDIR)'#010+
' $(COPYTREE) $(BASEDIR)/* $(INSTALL_SOURCEDIR)'#010+
#010+
'fpc_exampleinstall: $(addsuffix _distclean,$(TARGET_EXAMPLEDIRS))'#010+
'ifdef HASEXAMPLES'#010+
' $(MKDIR) $(INSTALL_EXAMPLEDIR)'#010+
'endif'#010+
'ifdef EXAMPLESOURCEFILES'#010+
' $(COPY) ','$(EXAMPLESOURCEFILES) $(INSTALL_EXAMPLEDIR)'#010+
'endif'#010+
'ifdef TARGET_EXAMPLEDIRS'#010+
' $(COPYTREE) $(addsuffix /*,$(TARGET_EXAMPLEDIRS)) $(INSTALL_EX'+
'AMPLEDIR)'#010+
'endif'#010+
#010+
'[distinstallrules]'#010+
'###########################################################','#########'+
'#'#010+
'# Dist Install'#010+
'#####################################################################'#010+
#010+
'.PHONY: fpc_distinstall'#010+
#010+
'fpc_distinstall: install exampleinstall'#010+
#010+
#010+
'[zipinstallrules]'#010+
'##########################################################','##########'+
'#'#010+
'# Zip'#010+
'#####################################################################'#010+
#010+
'.PHONY: fpc_zipinstall fpc_zipsourceinstall fpc_zipexampleinstall'#010+
#010+
'# Temporary path to pack a file, can only use a single deep'#010+
'# subdir, because the de','ltree can'#039't see the whole tree to remove'+
#010+
'ifndef PACKDIR'#010+
'ifndef inUnix'#010+
'PACKDIR=$(BASEDIR)/../fpc-pack'#010+
'else'#010+
'PACKDIR=/tmp/fpc-pack'#010+
'endif'#010+
'endif'#010+
#010+
'# Maybe create default zipname from packagename'#010+
'ifndef ZIPNAME'#010+
'ifdef DIST_ZIPNAME'#010+
'ZIPNAME=$(DIST_ZI','PNAME)'#010+
'else'#010+
'ZIPNAME=$(PACKAGE_NAME)'#010+
'endif'#010+
'endif'#010+
#010+
'ifndef FULLZIPNAME'#010+
'FULLZIPNAME=$(ZIPCROSSPREFIX)$(ZIPPREFIX)$(ZIPNAME)$(ZIPSUFFIX)'#010+
'endif'#010+
#010+
'# ZipTarget'#010+
'ifndef ZIPTARGET'#010+
'ifdef DIST_ZIPTARGET'#010+
'ZIPTARGET=DIST_ZIPTARGET'#010+
'else'#010+
'ZIPTARGET=install'#010+
'end','if'#010+
'endif'#010+
#010+
'# Use tar by default under linux'#010+
'ifndef USEZIP'#010+
'ifdef inUnix'#010+
'USETAR=1'#010+
'endif'#010+
'endif'#010+
#010+
'# Use a wrapper script by default for Os/2'#010+
'ifndef inUnix'#010+
'USEZIPWRAPPER=1'#010+
'endif'#010+
#010+
'# We need to be able to run in the current OS so fix'#010+
'# the path sepa','rator'#010+
'ifdef USEZIPWRAPPER'#010+
'ZIPPATHSEP=$(PATHSEP)'#010+
'ZIPWRAPPER=$(subst /,$(PATHSEP),$(DIST_DESTDIR)/fpczip$(SRCBATCHEXT))'#010+
'else'#010+
'ZIPPATHSEP=/'#010+
'endif'#010+
#010+
'# Create commands to create the zip/tar file'#010+
'ZIPCMD_CDPACK:=cd $(subst /,$(ZIPPATHSEP),$(PACKDIR)',')'#010+
'ZIPCMD_CDBASE:=cd $(subst /,$(ZIPPATHSEP),$(BASEDIR))'#010+
'ifdef USETAR'#010+
'ZIPDESTFILE:=$(DIST_DESTDIR)/$(FULLZIPNAME)$(TAREXT)'#010+
'ZIPCMD_ZIP:=$(TARPROG) cf$(TAROPT) $(ZIPDESTFILE) *'#010+
'else'#010+
'ZIPDESTFILE:=$(DIST_DESTDIR)/$(FULLZIPNAME)$(ZIPEXT)'#010+
'ZIPCMD_Z','IP:=$(subst /,$(ZIPPATHSEP),$(ZIPPROG)) -Dr $(ZIPOPT) $(ZIPD'+
'ESTFILE) *'#010+
'endif'#010+
#010+
'fpc_zipinstall:'#010+
' $(MAKE) $(ZIPTARGET) INSTALL_PREFIX=$(PACKDIR) ZIPINSTALL=1'#010+
' $(MKDIR) $(DIST_DESTDIR)'#010+
' $(DEL) $(ZIPDESTFILE)'#010+
'ifdef USEZIPWRA','PPER'#010+
'# Handle gecho separate as we need to espace \ with \\'#010+
'ifneq ($(ECHOREDIR),echo)'#010+
' $(ECHOREDIR) -e "$(subst \,\\,$(ZIPCMD_CDPACK))" > $(ZIPWRAPPE'+
'R)'#010+
' $(ECHOREDIR) -e "$(subst \,\\,$(ZIPCMD_ZIP))" >> $(ZIPWRAPPER)'+
#010+
' $(','ECHOREDIR) -e "$(subst \,\\,$(ZIPCMD_CDBASE))" >> $(ZIPWRA'+
'PPER)'#010+
'else'#010+
' echo $(ZIPCMD_CDPACK) > $(ZIPWRAPPER)'#010+
' echo $(ZIPCMD_ZIP) >> $(ZIPWRAPPER)'#010+
' echo $(ZIPCMD_CDBASE) >> $(ZIPWRAPPER)'#010+
'endif'#010+
'ifdef inUnix'#010+
' /bin/sh',' $(ZIPWRAPPER)'#010+
'else'#010+
' $(ZIPWRAPPER)'#010+
'endif'#010+
' $(DEL) $(ZIPWRAPPER)'#010+
'else'#010+
' $(ZIPCMD_CDPACK) ; $(ZIPCMD_ZIP) ; $(ZIPCMD_CDBASE)'#010+
'endif'#010+
' $(DELTREE) $(PACKDIR)'#010+
#010+
'fpc_zipsourceinstall:'#010+
' $(MAKE) fpc_zipinstall ZIPTARGE','T=sourceinstall ZIPSUFFIX=$(Z'+
'IPSOURCESUFFIX)'#010+
#010+
'fpc_zipexampleinstall:'#010+
'ifdef HASEXAMPLES'#010+
' $(MAKE) fpc_zipinstall ZIPTARGET=exampleinstall ZIPSUFFIX=$(ZI'+
'PEXAMPLESUFFIX)'#010+
'endif'#010+
#010+
'fpc_zipdistinstall:'#010+
' $(MAKE) fpc_zipinstall ZIPTARGET','=distinstall'#010+
#010+
#010+
'[cleanrules]'#010+
'#####################################################################'#010+
'# Clean rules'#010+
'#####################################################################'#010+
#010+
'.PHONY: fpc_clean fpc_cleanall fpc_distclean'#010+
#010+
'ifdef EXEFI','LES'#010+
'override CLEANEXEFILES:=$(addprefix $(TARGETDIRPREFIX),$(CLEANEXEFILES'+
'))'#010+
'endif'#010+
#010+
'ifdef CLEAN_UNITS'#010+
'override CLEANPPUFILES+=$(addsuffix $(PPUEXT),$(CLEAN_UNITS))'#010+
'endif'#010+
#010+
'ifdef CLEANPPUFILES'#010+
'override CLEANPPULINKFILES:=$(subst $(PPUEXT),$(O','EXT),$(CLEANPPUFILE'+
'S)) $(addprefix $(STATICLIBPREFIX),$(subst $(PPUEXT),$(STATICLIBEXT),$'+
'(CLEANPPUFILES))) $(addprefix $(IMPORTLIBPREFIX),$(subst $(PPUEXT),$(S'+
'TATICLIBEXT),$(CLEANPPUFILES)))'#010+
'ifdef DEBUGSYMEXT'#010+
'override CLEANPPULINKFILES+=$(s','ubst $(PPUEXT),$(DEBUGSYMEXT),$(CLEAN'+
'PPUFILES))'#010+
'endif'#010+
'override CLEANPPUFILES:=$(addprefix $(UNITTARGETDIRPREFIX),$(CLEANPPUF'+
'ILES))'#010+
'override CLEANPPULINKFILES:=$(wildcard $(addprefix $(UNITTARGETDIRPREF'+
'IX),$(CLEANPPULINKFILES)))'#010+
'endif'#010+
#010+
'fpc_c','lean: $(CLEANTARGET)'#010+
'ifdef CLEANEXEFILES'#010+
' -$(DEL) $(CLEANEXEFILES)'#010+
'endif'#010+
'ifdef CLEANPPUFILES'#010+
' -$(DEL) $(CLEANPPUFILES)'#010+
'endif'#010+
'ifneq ($(CLEANPPULINKFILES),)'#010+
' -$(DEL) $(CLEANPPULINKFILES)'#010+
'endif'#010+
'ifdef CLEANRSTFILES'#010+
' ','-$(DEL) $(addprefix $(UNITTARGETDIRPREFIX),$(CLEANRSTFILES))'+
#010+
'endif'#010+
'ifdef CLEAN_FILES'#010+
' -$(DEL) $(CLEAN_FILES)'#010+
'endif'#010+
'ifdef LIB_NAME'#010+
' -$(DEL) $(LIB_NAME) $(LIB_FULLNAME)'#010+
'endif'#010+
' -$(DEL) $(FPCMADE) Package.fpc $(PPAS) script','.res link.res $'+
'(FPCEXTFILE) $(REDIRFILE)'#010+
' -$(DEL) *$(ASMEXT) *_ppas$(BATCHEXT)'#010+
#010+
'fpc_cleanall: $(CLEANTARGET)'#010+
'ifdef CLEANEXEFILES'#010+
' -$(DEL) $(CLEANEXEFILES)'#010+
'endif'#010+
'ifdef COMPILER_UNITTARGETDIR'#010+
'ifdef CLEANPPUFILES'#010+
' -$(DEL) ','$(CLEANPPUFILES)'#010+
'endif'#010+
'ifneq ($(CLEANPPULINKFILES),)'#010+
' -$(DEL) $(CLEANPPULINKFILES)'#010+
'endif'#010+
'ifdef CLEANRSTFILES'#010+
' -$(DEL) $(addprefix $(UNITTARGETDIRPREFIX),$(CLEANRSTFILES))'#010+
'endif'#010+
'endif'#010+
' -$(DELTREE) units'#010+
' -$(DEL) *','$(OEXT) *$(PPUEXT) *$(RSTEXT) *$(ASMEXT) *$(STATICL'+
'IBEXT) *$(SHAREDLIBEXT) *$(PPLEXT)'#010+
'ifneq ($(PPUEXT),.ppu)'#010+
' -$(DEL) *.o *.ppu *.a'#010+
'endif'#010+
' -$(DELTREE) *$(SMARTEXT)'#010+
' -$(DEL) fpcmade.* Package.fpc $(PPAS) script.res link.','res $('+
'FPCEXTFILE) $(REDIRFILE)'#010+
' -$(DEL) *_ppas$(BATCHEXT)'#010+
'ifdef AOUTEXT'#010+
' -$(DEL) *$(AOUTEXT)'#010+
'endif'#010+
'ifdef DEBUGSYMEXT'#010+
' -$(DEL) *$(DEBUGSYMEXT)'#010+
'endif'#010+
#010+
'fpc_distclean: cleanall'#010+
#010+
#010+
'[baseinforules]'#010+
'############################','########################################'+
'#'#010+
'# Base info rules'#010+
'#####################################################################'#010+
#010+
'.PHONY: fpc_baseinfo'#010+
#010+
'override INFORULES+=fpc_baseinfo'#010+
#010+
'fpc_baseinfo:'#010+
' @$(ECHO)'#010+
' @$(ECHO) == P','ackage info =='#010+
' @$(ECHO) Package Name..... $(PACKAGE_NAME)'#010+
' @$(ECHO) Package Version.. $(PACKAGE_VERSION)'#010+
' @$(ECHO)'#010+
' @$(ECHO) == Configuration info =='#010+
' @$(ECHO)'#010+
' @$(ECHO) FPC.......... $(FPC)'#010+
' ',' @$(ECHO) FPC Version.. $(FPC_VERSION)'#010+
' @$(ECHO) Source CPU... $(CPU_SOURCE)'#010+
' @$(ECHO) Target CPU... $(CPU_TARGET)'#010+
' @$(ECHO) Source OS.... $(OS_SOURCE)'#010+
' @$(ECHO) Target OS.... $(OS_TARGET)'#010+
' @$(EC','HO) Full Source.. $(FULL_SOURCE)'#010+
' @$(ECHO) Full Target.. $(FULL_TARGET)'#010+
' @$(ECHO) SourceSuffix. $(SOURCESUFFIX)'#010+
' @$(ECHO) TargetSuffix. $(TARGETSUFFIX)'#010+
' @$(ECHO)'#010+
' @$(ECHO) == Directory info =='#010+
' ',' @$(ECHO)'#010+
' @$(ECHO) Required pkgs... $(REQUIRE_PACKAGES)'#010+
' @$(ECHO)'#010+
' @$(ECHO) Basedir......... $(BASEDIR)'#010+
' @$(ECHO) FPCDir.......... $(FPCDIR)'#010+
' @$(ECHO) CrossBinDir..... $(CROSSBINDIR)'#010+
' @$(ECHO) ',' UnitsDir........ $(UNITSDIR)'#010+
' @$(ECHO) PackagesDir..... $(PACKAGESDIR)'#010+
' @$(ECHO)'#010+
' @$(ECHO) GCC library..... $(GCCLIBDIR)'#010+
' @$(ECHO) Other library... $(OTHERLIBDIR)'#010+
' @$(ECHO)'#010+
' @$(ECHO) == Tools i','nfo =='#010+
' @$(ECHO)'#010+
' @$(ECHO) As........ $(AS)'#010+
' @$(ECHO) Ld........ $(LD)'#010+
' @$(ECHO) Ar........ $(AR)'#010+
' @$(ECHO) Rc........ $(RC)'#010+
' @$(ECHO)'#010+
' @$(ECHO) Mv........ $(MVPROG)'#010+
' @$(ECHO) Cp','........ $(CPPROG)'#010+
' @$(ECHO) Rm........ $(RMPROG)'#010+
' @$(ECHO) GInstall.. $(GINSTALL)'#010+
' @$(ECHO) Echo...... $(ECHO)'#010+
' @$(ECHO) Shell..... $(SHELL)'#010+
' @$(ECHO) Date...... $(DATE)'#010+
' @$(ECHO) FPCMake... ','$(FPCMAKE)'#010+
' @$(ECHO) PPUMove... $(PPUMOVE)'#010+
' @$(ECHO) Upx....... $(UPXPROG)'#010+
' @$(ECHO) Zip....... $(ZIPPROG)'#010+
' @$(ECHO)'#010+
' @$(ECHO) == Object info =='#010+
' @$(ECHO)'#010+
' @$(ECHO) Target Loaders.......','. $(TARGET_LOADERS)'#010+
' @$(ECHO) Target Units.......... $(TARGET_UNITS)'#010+
' @$(ECHO) Target Implicit Units. $(TARGET_IMPLICITUNITS)'#010+
' @$(ECHO) Target Programs....... $(TARGET_PROGRAMS)'#010+
' @$(ECHO) Target Dirs.........','.. $(TARGET_DIRS)'#010+
' @$(ECHO) Target Examples....... $(TARGET_EXAMPLES)'#010+
' @$(ECHO) Target ExampleDirs.... $(TARGET_EXAMPLEDIRS)'#010+
' @$(ECHO)'#010+
' @$(ECHO) Clean Units......... $(CLEAN_UNITS)'#010+
' @$(ECHO) Clean File','s......... $(CLEAN_FILES)'#010+
' @$(ECHO)'#010+
' @$(ECHO) Install Units....... $(INSTALL_UNITS)'#010+
' @$(ECHO) Install Files....... $(INSTALL_FILES)'#010+
' @$(ECHO)'#010+
' @$(ECHO) == Install info =='#010+
' @$(ECHO)'#010+
' @$(ECH','O) DateStr.............. $(DATESTR)'#010+
' @$(ECHO) ZipName.............. $(ZIPNAME)'#010+
' @$(ECHO) ZipPrefix............ $(ZIPPREFIX)'#010+
' @$(ECHO) ZipCrossPrefix....... $(ZIPCROSSPREFIX)'#010+
' @$(ECHO) ZipSuffix............ $','(ZIPSUFFIX)'#010+
' @$(ECHO) FullZipName.......... $(FULLZIPNAME)'#010+
' @$(ECHO) Install FPC Package.. $(INSTALL_FPCPACKAGE)'#010+
' @$(ECHO)'#010+
' @$(ECHO) Install base dir..... $(INSTALL_BASEDIR)'#010+
' @$(ECHO) Install binary di','r... $(INSTALL_BINDIR)'#010+
' @$(ECHO) Install library dir.. $(INSTALL_LIBDIR)'#010+
' @$(ECHO) Install units dir.... $(INSTALL_UNITDIR)'#010+
' @$(ECHO) Install source dir... $(INSTALL_SOURCEDIR)'#010+
' @$(ECHO) Install doc dir......',' $(INSTALL_DOCDIR)'#010+
' @$(ECHO) Install example dir.. $(INSTALL_EXAMPLEDIR)'#010+
' @$(ECHO) Install data dir..... $(INSTALL_DATADIR)'#010+
' @$(ECHO)'#010+
' @$(ECHO) Dist destination dir. $(DIST_DESTDIR)'#010+
' @$(ECHO) Dist zip ','name........ $(DIST_ZIPNAME)'#010+
' @$(ECHO)'#010+
#010+
'[inforules]'#010+
'#####################################################################'#010+
'# Info rules'#010+
'#####################################################################'#010+
#010+
'.PHONY: fpc_info'#010+
#010+
'fpc_info:',' $(INFORULES)'#010+
#010+
'[makefilerules]'#010+
'#####################################################################'#010+
'# Rebuild Makefile'#010+
'#####################################################################'#010+
#010+
'.PHONY: fpc_makefile fpc_makefiles fpc_makefile_s','ub1 fpc_makefile_su'+
'b2 \'#010+
' fpc_makefile_dirs'#010+
#010+
'fpc_makefile:'#010+
' $(FPCMAKE) -w -T$(OS_TARGET) Makefile.fpc'#010+
#010+
'fpc_makefile_sub1:'#010+
'ifdef TARGET_DIRS'#010+
' $(FPCMAKE) -w -T$(OS_TARGET) $(addsuffix /Makefile.fpc,$(TARGE'+
'T_DIRS))'#010+
'endif'#010+
'if','def TARGET_EXAMPLEDIRS'#010+
' $(FPCMAKE) -w -T$(OS_TARGET) $(addsuffix /Makefile.fpc,$(TARGE'+
'T_EXAMPLEDIRS))'#010+
'endif'#010+
#010+
'fpc_makefile_sub2: $(addsuffix _makefile_dirs,$(TARGET_DIRS) $(TARGET_'+
'EXAMPLEDIRS))'#010+
#010+
'fpc_makefile_dirs: fpc_makefile_sub1 fp','c_makefile_sub2'#010+
#010+
'fpc_makefiles: fpc_makefile fpc_makefile_dirs'#010+
#010+
'[localmakefile]'#010+
'#####################################################################'#010+
'# Local Makefile'#010+
'#####################################################################'#010+
#010+
'if','neq ($(wildcard fpcmake.loc),)'#010+
'include fpcmake.loc'#010+
'endif'#010+
#010+
#010+
'[userrules]'#010+
'#####################################################################'#010+
'# Users rules'#010+
'#####################################################################'#010+
#010+
'[lclrules]'#010+
'###','#################################################################'+
'#'#010+
'# LCL Rules'#010+
'#####################################################################'#010+
#010+
'# LCL Platform'#010+
'ifndef LCL_PLATFORM'#010+
'ifneq ($(findstring $(OS_TARGET),win32 win64),)'#010+
'LCL_PLA','TFORM=win32'#010+
'else'#010+
'LCL_PLATFORM=gtk'#010+
'endif'#010+
'endif'#010+
'export LCL_PLATFORM'#010+
#010+
'# Check if the specified LCLDIR is correct'#010+
'ifdef LCLDIR'#010+
'override LCLDIR:=$(subst \,/,$(LCLDIR))'#010+
'ifeq ($(wildcard $(LCLDIR)/units/$(LCL_PLATFORM)),)'#010+
'override LCLDIR=wrong'#010+
'end','if'#010+
'else'#010+
'override LCLDIR=wrong'#010+
'endif'#010+
#010+
'# Check if the default LCLDIR is correct'#010+
'ifdef DEFAULT_LCLDIR'#010+
'override LCLDIR:=$(subst \,/,$(DEFAULT_LCLDIR))'#010+
'ifeq ($(wildcard $(LCLDIR)/units/$(LCL_PLATFORM)),)'#010+
'override LCLDIR=wrong'#010+
'endif'#010+
'endif'#010+
#010+
'# Chec','k for development version'#010+
'ifeq ($(LCLDIR),wrong)'#010+
'override LCLDIR=$(subst /units/$(LCL_PLATFORM),,$(firstword $(wildcard'+
' $(addsuffix /units/$(LCL_PLATFORM),$(BASEDIR)/lcl $(BASEDIR)))))'#010+
'ifeq ($(LCLDIR),)'#010+
'override LCLDIR=wrong'#010+
'endif'#010+
'endif'#010+
#010+
'# ','Check for release version'#010+
'ifeq ($(LCLDIR),wrong)'#010+
'override LCLDIR=$(subst /units/$(LCL_PLATFORM),,$(firstword $(wildcard'+
' $(addsuffix /lib/lazarus/units/$(LCL_PLATFORM),/usr/local /usr))))'#010+
'ifeq ($(LCLDIR),)'#010+
'override LCLDIR=wrong'#010+
'endif'#010+
'endif'#010+
#010,
'# Generate dirs'#010+
'override LCLUNITDIR:=$(wildcard $(LCLDIR)/units/$(LCL_PLATFORM) $(LCLD'+
'IR)/units)'#010+
'override LCLCOMPONENTDIR:=$(wildcard $(LCLDIR)/.. $(LCLDIR)/../compone'+
'nts $(LCLDIR)/components)'#010+
'export LCLDIR LCLUNITDIR LCLCOMPONENTDIR'#010+
#010+
'# Add',' LCL dirs to paths'#010+
'override REQUIRE_PACKAGESDIR+=$(LCLCOMPONENTDIR)'#010+
'override COMPILER_UNITDIR+=$(LCLUNITDIR)'#010+
#010+
'[lclinforules]'#010+
'#####################################################################'#010+
'# LCL Info rules'#010+
'############################','########################################'+
'#'#010+
'override INFORULES+=lclinfo'#010+
#010+
'.PHONY: lclinfo'#010+
#010+
'lclinfo:'#010+
' @$(ECHO) == LCL info =='#010+
' @$(ECHO)'#010+
' @$(ECHO) Platform............. $(LCL_PLATFORM)'#010+
' @$(ECHO) LCLDIR.............','.. $(LCLDIR)'#010+
' @$(ECHO) LCL Unit dir......... $(LCLUNITDIR)'#010+
' @$(ECHO) LCL Component dir.... $(LCLCOMPONENTDIR)'#010+
' @$(ECHO)'#010
);
syntax highlighted by Code2HTML, v. 0.9.1