%s
History_Already Вече класифицирано като %s
History_RemoveAll Премахни всички
History_RemovePage Премахни тази страница
History_Remove За премахване на съобщенията натисни:
History_SearchMessage Търси по подател и заглавие
History_NoMessages Няма съобщения
History_ShowMagnet По магнит
History_Magnet (само класифицираните по магнит)
History_ResetSearch Изчисти търсенето
Password_Title Парола
Password_Enter Въведи парола
Password_Go ОК
Password_Error1 Невалидна парола
Security_Error1 Портът с легитимиране трябва да бъде число между 1 и 65535
Security_Stealth Скрит режим
Security_NoStealthMode Не (скрит режим)
Security_ExplainStats (Когато това е включено, POPFile веднъж дневно изпраща към скрипт на www.usethesource.com: bc (броя на кошовете), mc (броя съобщения, класифицирани от POPFile) и ec (броя на грешно класифицираните съобщения). Тези стойности се съхраняват във файл и благодарение на тях аз публикувам статистика за начина, по който хората използват POPFile и колко добре работи. Моят Web сървър съхранява лог-файловете си в продължение на около 5 дни, след което ги изтрива; аз не пазя връзка между статистическите данни и конкретните IP адреси.)
Security_ExplainUpdate (Когато това е включено, POPFile веднъж дневно изпраща към скрипт на www.usethesource.com: bc (броя на кошовете), mc (броя съобщения, класифицирани от POPFile) и ec (броя на грешно класифицираните съобщения). POPFile получава обратно известие дали има по-нова версия на софтуера и показва съответна картинка на всяка страница. Моят Web сървър съхранява лог-файловете си в продължение на около 5 дни, след което ги изтрива; аз не пазя връзка между запитванията за нова версия и конкретните IP адреси.)
Security_PasswordTitle Парола за потребителския интерфейс
Security_Password Парола
Security_PasswordUpdate Паролата променена на %s
Security_AUTHTitle Легитимация пред сървъра/AUTH
Security_SecureServer Сървър, изискващ легитимация
Security_SecureServerUpdate Сървърът с леитимация промене на %s; тази промяна ще бъде отразена при следващото стартиране на POPFile
Security_SecurePort Порт за легитимация
Security_SecurePortUpdate Портът променен на %s; тази промяна ще бъде отразена при следващото стартиране на POPFile
Security_POP3 Приемане на POP3 връзки от други машини
Security_UI Приемане на HTTP връзки (за потребителския интерфейс) от други машини
Security_UpdateTitle Автоматична проверка за нови версии
Security_Update Ежедневна проверка за нови версии на POPFile
Security_StatsTitle Събиране на статистика
Security_Stats Ежедневно изпращане на статистически данни на автора
Magnet_Error1 Магнит '%s' вече е зададен за кош '%s'
Magnet_Error2 Новият магнит '%s' противоречи на магнит '%s' за кош '%s' и може да предизвика нееднозначност; магнитът не е добавен.
Magnet_Error3 Създай нов магнит '%s' за кош '%s'
Magnet_CurrentMagnets Магнити
Magnet_Message1 Следните магнити служат за незабавно класифициране на съобщенията в даден кош.
Magnet_CreateNew Създай нов магнит
Magnet_Explanation Има три вида магнити: - Адрес или име на подател: Например: john@company.com за конкретен адрес,
company.com за всички адреси от company.com,
John Doe за конкретен подател, John за всички John-овци - Адрес или име на получател: Подобно на адреса на подател, но за адреса на получателя на съобщението
- Думи от заглавието: Например: hello за всички съобщения, чието заглавие съдържа hello
Magnet_MagnetType Тип на магнита
Magnet_Value Стойност
Magnet_Always Класифицирай винаги в кош
Bucket_Error1 Имената на кошовете може да съдържат само малки латински букви от a до z плюс знаците - и _
Bucket_Error2 Вече съществува кош %s
Bucket_Error3 Създаден е кош %s
Bucket_Error4 Моля въведете нещо
Bucket_Error5 Кош %s преименуван на %s
Bucket_Error6 Изтрит е кош %s
Bucket_Title Статистика
Bucket_BucketName Кош
Bucket_WordCount Брой думи
Bucket_WordCounts Брой думи
Bucket_UniqueWords Уникални думи
Bucket_SubjectModification Промяна на заглавието
Bucket_ChangeColor Промени цвета
Bucket_NotEnoughData Недостатъчно данни
Bucket_ClassificationAccuracy Точност на класификацията
Bucket_EmailsClassified Класифицирани съобщения
Bucket_EmailsClassifiedUpper Класифицирани съобщения
Bucket_ClassificationErrors Грешки при класификацията
Bucket_Accuracy Точност
Bucket_ClassificationCount Брой класифицирани
Bucket_ResetStatistics Нулирай статистиката
Bucket_LastReset Последно нулиране
Bucket_CurrentColor В момента цветът за %s е %s
Bucket_SetColorTo Промени цветът за %s на %s
Bucket_Maintenance Промени
Bucket_CreateBucket Създай кош с име
Bucket_DeleteBucket Изтрий кош с име
Bucket_RenameBucket Преименувай кош с име
Bucket_Lookup Търсене
Bucket_LookupMessage Търсене на дума по кошовете
Bucket_LookupMessage2 Резултати от търсенето
Bucket_LookupMostLikely %s най-често се среща в %s
Bucket_DoesNotAppear %s не присъства в никой кош
Bucket_DisabledGlobally Изключено за всички
Bucket_To към
Bucket_Quarantine Карантина
SingleBucket_Title Детайли за %s
SingleBucket_WordCount Брой думи в коша
SingleBucket_TotalWordCount Общо думи
SingleBucket_Percentage Процент от общия брой
SingleBucket_WordTable Думи, попадащи в %s
SingleBucket_Message1 Означените със звездичка (*) думи са използвани за класификация при това пускане на POPFile. Щракнете с мишката на някоя дума, за да видите вероятността за попадането й във всички кошове.
SingleBucket_Unique %s уникални
Session_Title Сеансът на работа с POPFile е приключил
Session_Error Вашият сеанс на работа с POPFile е приключил. Това може да се е получило от спиране и пускане на POPFile и оставен отворен прозорец на браузера. Щракнете на някой от горните връзки, за да продължите работа с POPFile.
Header_MenuSummary This table is the navigation menu which allows access to each of the different pages of the control center.
History_MainTableSummary This table shows the sender and subject of recently received messages and allows them to be reviewed and reclassified. Clicking on the subject line will show the full message text, along with information about why it was classified as it was. The 'Should be' column allows you to specify which bucket the message belongs in, or to undo that change. The 'Delete' column allows you to delete specific messages from the history if you don't need them anymore.
History_OpenMessageSummary This table contains the full text of an email message, with the words that are used for classification highlighted according to the bucket that was most relevant for each.
Bucket_MainTableSummary This table provides an overview of the classification buckets. Each row shows the bucket name, the word count total for that bucket, the actual number of individual words in each bucket, whether the email's subject line will be modified when it gets classified to that bucket, whether to quarantine the messages received in that bucket, and a table to pick the color used in displaying anything related to that bucket in the control center.
Bucket_StatisticsTableSummary This table provides three sets of statistics on the overall performance of PopFile. The first is how accurate its classification is, the second is how many emails have been classified, and to which buckets, and the third is how many words are in each bucket, and what their relative percentages are.
Bucket_MaintenanceTableSummary This table contains forms that allow you to create, delete or rename buckets, and to lookup a word in all of the buckets to see its relative probabilities.
Bucket_AccuracyChartSummary This table graphically represents the accuracy of the email classification.
Bucket_BarChartSummary This table graphically represents a percentage allocation for each of the different buckets. It is used for both number of emails classified, and total word counts.
Bucket_LookupResultsSummary This table shows the probabilities associated with any given word of the corpus. For each bucket, it shows the frequency that that word occurs, the probability that it will occur in that bucket, and the overall effect on the score of the bucket if that word exists in an email.
Bucket_WordListTableSummary This table provides a listing of all the words for a particular bucket, organized by common first letter for each row.
Magnet_MainTableSummary This table shows the list of magnets that are used to automatically classify email according to fixed rules. Each row shows how the magnet is defined, what bucket it is intended for, and a button to delete the magnet.
Configuration_MainTableSummary This table contains a number of forms to allow you to control the configuration of PopFile.
Configuration_InsertionTableSummary This table contains buttons that determine whether or not certain modifications are made to the headers or subject line of the email before it is passed on to the email client.
Security_MainTableSummary This table provides sets of controls that affect the security of the overall configuration of PopFile, whether it should automatically check for updates to the program, and whether statistics about PopFile's performance should be sent to the central datastore of the program's author for general information.
Advanced_MainTableSummary This table provides a list of words that PopFile ignores when classifying email due to their relative frequency in email in general. They are organized per row according to the first letter of the words.