In addition to the standard configuration file options, per-endpoint configuration settings can be specified in the config file. The syntax is as follows: Section [EP::...]

[EP::ALIAS] Key Name=Value String Default:

Call capacity for an endpoint. No more than Default:

Apply only to gateways. Allow priority based routing in case, when more than one gateway matches a dialed number. The smaller value the higher priority is assigned to a gateway. A call is routed to the first available gateway (that has available capacity) with the highest priority (the smallest Default: N/A

Additional prefixes for this gateway. Apply only to gateways. Special characters Default: N/A

Sets Called-Party-Number type of number to the specified value for calls sent to this endpoint (0 - UnknownType, 1 - InternationalType, 2 - NationalType, 3 - NetworkSpecificType, 4 - SubscriberType, 6 - AbbreviatedType, 7 - ReservedType). Default: N/A

Sets Calling-Party-Number type of number to the specified value for calls sent to this endpoint (0 - UnknownType, 1 - InternationalType, 2 - NationalType, 3 - NetworkSpecificType, 4 - SubscriberType, 6 - AbbreviatedType, 7 - ReservedType). Default: Enables/disables proxying calls sent to this endpoint (0 - do not change global proxy settings, 1 - force proxy mode, 2 - disable proxy mode). Example: [RasSrv::PermanentEndpoints] 192.168.1.1=gw1;48 192.168.1.2=gw2;48,!4850,!4860,!4869,!4888 [EP::gw1] Capacity=60 GatewayPriority=1 [EP::gw2] Capacity=30 GatewayPriority=2 In this example, calls will be sent to the gateway