/*
* knowndrives.cpp
*
* Home page of code is: http://smartmontools.sourceforge.net
* Address of support mailing list: smartmontools-support@lists.sourceforge.net
*
* Copyright (C) 2003-6 Philip Williams, Bruce Allen
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*
* You should have received a copy of the GNU General Public License
* (for example COPYING); if not, write to the Free
* Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
#include "config.h"
#include "int64.h"
#include <stdio.h>
#include "atacmds.h"
#include "ataprint.h"
#include "extern.h"
#include "knowndrives.h"
#include "utility.h" // includes <regex.h>
const char *knowndrives_c_cvsid="$Id: knowndrives.cpp,v 1.156 2006/10/30 22:35:28 pjwilliams Exp $"
ATACMDS_H_CVSID ATAPRINT_H_CVSID CONFIG_H_CVSID EXTERN_H_CVSID INT64_H_CVSID KNOWNDRIVES_H_CVSID UTILITY_H_CVSID;
#define MODEL_STRING_LENGTH 40
#define FIRMWARE_STRING_LENGTH 8
#define TABLEPRINTWIDTH 19
// See vendorattributeargs[] array in atacmds.cpp for definitions.
#define PRESET_9_MINUTES { 9, 1 }
#define PRESET_9_TEMP { 9, 2 }
#define PRESET_9_SECONDS { 9, 3 }
#define PRESET_9_HALFMINUTES { 9, 4 }
#define PRESET_192_EMERGENCYRETRACTCYCLECT { 192, 1 }
#define PRESET_193_LOADUNLOAD { 193, 1 }
#define PRESET_194_10XCELSIUS { 194, 1 }
#define PRESET_194_UNKNOWN { 194, 2 }
#define PRESET_198_OFFLINESCANUNCSECTORCT { 198, 1 }
#define PRESET_200_WRITEERRORCOUNT { 200, 1 }
#define PRESET_201_DETECTEDTACOUNT { 201, 1 }
#define PRESET_220_TEMP { 220, 1 }
/* Arrays of preset vendor-specific attribute options for use in
* knowndrives[]. */
extern int64_t bytes;
// to hold onto exit code for atexit routine
extern int exitstatus;
// These three are common to several models.
const unsigned char vendoropts_9_minutes[][2] = {
PRESET_9_MINUTES,
{0,0}
};
const unsigned char vendoropts_9_halfminutes[][2] = {
PRESET_9_HALFMINUTES,
{0,0}
};
const unsigned char vendoropts_9_seconds[][2] = {
PRESET_9_SECONDS,
{0,0}
};
const unsigned char vendoropts_Maxtor_4D080H4[][2] = {
PRESET_9_MINUTES,
PRESET_194_UNKNOWN,
{0,0}
};
const unsigned char vendoropts_Fujitsu_MHS2020AT[][2] = {
PRESET_9_SECONDS,
PRESET_192_EMERGENCYRETRACTCYCLECT,
PRESET_198_OFFLINESCANUNCSECTORCT,
PRESET_200_WRITEERRORCOUNT,
PRESET_201_DETECTEDTACOUNT,
{0,0}
};
const unsigned char vendoropts_Fujitsu_MHR2040AT[][2] = {
PRESET_9_SECONDS,
PRESET_192_EMERGENCYRETRACTCYCLECT,
PRESET_198_OFFLINESCANUNCSECTORCT,
PRESET_200_WRITEERRORCOUNT,
{0,0}
};
const unsigned char vendoropts_Samsung_SV4012H[][2] = {
PRESET_9_HALFMINUTES,
{0,0}
};
const unsigned char vendoropts_Samsung_SV1204H[][2] = {
PRESET_9_HALFMINUTES,
PRESET_194_10XCELSIUS,
{0,0}
};
const unsigned char vendoropts_Hitachi_DK23XX[][2] = {
PRESET_9_MINUTES,
PRESET_193_LOADUNLOAD,
{0,0}
};
const char same_as_minus_F[]="Fixes byte order in some SMART data (same as -F samsung)";
const char same_as_minus_F2[]="Fixes byte order in some SMART data (same as -F samsung2)";
const char may_need_minus_F_disabled[] ="May need -F samsung disabled; see manual for details.";
const char may_need_minus_F2_disabled[]="May need -F samsung2 disabled; see manual for details.";
const char may_need_minus_F2_enabled[] ="May need -F samsung2 enabled; see manual for details.";
const char may_need_minus_F_enabled[] ="May need -F samsung or -F samsung2 enabled; see manual for details.";
/* Special-purpose functions for use in knowndrives[]. */
void specialpurpose_reverse_samsung(smartmonctrl *con)
{
if (con->fixfirmwarebug==FIX_NOTSPECIFIED)
con->fixfirmwarebug = FIX_SAMSUNG;
}
void specialpurpose_reverse_samsung2(smartmonctrl *con)
{
if (con->fixfirmwarebug==FIX_NOTSPECIFIED)
con->fixfirmwarebug = FIX_SAMSUNG2;
}
/* Table of settings for known drives terminated by an element containing all
* zeros. The drivesettings structure is described in knowndrives.h. Note
* that lookupdrive() will search knowndrives[] from the start to end or
* until it finds the first match, so the order in knowndrives[] is important
* for distinct entries that could match the same drive. */
// Note that the table just below uses EXTENDED REGULAR EXPRESSIONS.
// A good on-line reference for these is:
// http://www.zeus.com/extra/docsystem/docroot/apps/web/docs/modules/access/regex.html
const drivesettings knowndrives[] = {
{ "IBM Deskstar 60GXP series", // ER60A46A firmware
"(IBM-|Hitachi )?IC35L0[12346]0AVER07",
"^ER60A46A$",
NULL, NULL, NULL, NULL
},
{ "IBM Deskstar 60GXP series", // All other firmware
"(IBM-|Hitachi )?IC35L0[12346]0AVER07",
".*",
"IBM Deskstar 60GXP drives may need upgraded SMART firmware.\n"
"Please see http://www.geocities.com/dtla_update/index.html#rel and\n"
"http://www-3.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-42215 or\n"
"http://www-1.ibm.com/support/docview.wss?uid=psg1MIGR-42215",
NULL, NULL, NULL
},
{ "IBM Deskstar 40GV & 75GXP series (A5AA/A6AA firmware)",
"(IBM-)?DTLA-30[57]0[123467][05]",
"^T[WX][123468AG][OF]A[56]AA$",
NULL, NULL, NULL, NULL
},
{ "IBM Deskstar 40GV & 75GXP series (all other firmware)",
"(IBM-)?DTLA-30[57]0[123467][05]",
".*",
"IBM Deskstar 40GV and 75GXP drives may need upgraded SMART firmware.\n"
"Please see http://www.geocities.com/dtla_update/ and\n"
"http://www-3.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-42215 or\n"
"http://www-1.ibm.com/support/docview.wss?uid=psg1MIGR-42215",
NULL, NULL, NULL
},
{ NULL, // ExcelStor J240, J340, J360, J680, and J880
"^ExcelStor Technology J(24|34|36|68|88)0$",
".*",
NULL, NULL, NULL, NULL
},
{ NULL, // Fujitsu M1623TAU
"^FUJITSU M1623TAU$",
".*",
NULL,
vendoropts_9_seconds,
NULL, NULL
},
{ "Fujitsu MHG series",
"^FUJITSU MHG2...ATU?",
".*",
NULL,
vendoropts_9_seconds,
NULL, NULL
},
{ "Fujitsu MHH series",
"^FUJITSU MHH2...ATU?",
".*",
NULL,
vendoropts_9_seconds,
NULL, NULL
},
{ "Fujitsu MHJ series",
"^FUJITSU MHJ2...ATU?",
".*",
NULL,
vendoropts_9_seconds,
NULL, NULL
},
{ "Fujitsu MHK series",
"^FUJITSU MHK2...ATU?",
".*",
NULL,
vendoropts_9_seconds,
NULL, NULL
},
{ NULL, // Fujitsu MHL2300AT
"^FUJITSU MHL2300AT$",
".*",
"This drive's firmware has a harmless Drive Identity Structure\n"
"checksum error bug.",
vendoropts_9_seconds,
NULL, NULL
},
{ NULL, // MHM2200AT, MHM2150AT, MHM2100AT, MHM2060AT
"^FUJITSU MHM2(20|15|10|06)0AT$",
".*",
"This drive's firmware has a harmless Drive Identity Structure\n"
"checksum error bug.",
vendoropts_9_seconds,
NULL, NULL
},
{ "Fujitsu MHN series",
"^FUJITSU MHN2...AT$",
".*",
NULL,
vendoropts_9_seconds,
NULL, NULL
},
{ NULL, // Fujitsu MHR2020AT
"^FUJITSU MHR2020AT$",
".*",
NULL,
vendoropts_9_seconds,
NULL, NULL
},
{ NULL, // Fujitsu MHR2040AT
"^FUJITSU MHR2040AT$",
".*", // Tested on 40BA
NULL,
vendoropts_Fujitsu_MHR2040AT,
NULL, NULL
},
{ "Fujitsu MHSxxxxAT family",
"^FUJITSU MHS20[6432]0AT( .)?$",
".*",
NULL,
vendoropts_Fujitsu_MHS2020AT,
NULL, NULL
},
{ "Fujitsu MHT series",
"^FUJITSU MHT2...(AH|AS|AT|BH)U?",
".*",
NULL,
vendoropts_9_seconds,
NULL, NULL
},
{ "Fujitsu MHU series",
"^FUJITSU MHU2...ATU?",
".*",
NULL,
vendoropts_9_seconds,
NULL, NULL
},
{ "Fujitsu MHV series",
"^FUJITSU MHV2...(AH|AS|AT|BH|BS|BT)",
".*",
NULL,
vendoropts_9_seconds,
NULL, NULL
},
{ "Fujitsu MPA..MPG series",
"^FUJITSU MP[A-G]3...A[HTEV]U?",
".*",
NULL,
vendoropts_9_seconds,
NULL, NULL
},
{ NULL, // Samsung SV4012H (known firmware)
"^SAMSUNG SV4012H$",
"^RM100-08$",
NULL,
vendoropts_Samsung_SV4012H,
specialpurpose_reverse_samsung,
same_as_minus_F
},
{ NULL, // Samsung SV4012H (all other firmware)
"^SAMSUNG SV4012H$",
".*",
may_need_minus_F_disabled,
vendoropts_Samsung_SV4012H,
specialpurpose_reverse_samsung,
same_as_minus_F
},
{ NULL, // Samsung SV0412H (known firmware)
"^SAMSUNG SV0412H$",
"^SK100-01$",
NULL,
vendoropts_Samsung_SV1204H,
specialpurpose_reverse_samsung,
same_as_minus_F
},
{ NULL, // Samsung SV0412H (all other firmware)
"^SAMSUNG SV0412H$",
".*",
may_need_minus_F_disabled,
vendoropts_Samsung_SV1204H,
specialpurpose_reverse_samsung,
same_as_minus_F
},
{ NULL, // Samsung SV1204H (known firmware)
"^SAMSUNG SV1204H$",
"^RK100-1[3-5]$",
NULL,
vendoropts_Samsung_SV1204H,
specialpurpose_reverse_samsung,
same_as_minus_F
},
{ NULL, // Samsung SV1204H (all other firmware)
"^SAMSUNG SV1204H$",
".*",
may_need_minus_F_disabled,
vendoropts_Samsung_SV1204H,
specialpurpose_reverse_samsung,
same_as_minus_F
},
{ NULL, // SAMSUNG SV0322A tested with FW JK200-35
"^SAMSUNG SV0322A$",
".*",
NULL,
NULL,
NULL,
NULL
},
{ NULL, // SAMSUNG SP40A2H with RR100-07 firmware
"^SAMSUNG SP40A2H$",
"^RR100-07$",
NULL,
vendoropts_9_halfminutes,
specialpurpose_reverse_samsung,
same_as_minus_F
},
{ NULL, // SAMSUNG SP8004H with QW100-61 firmware
"^SAMSUNG SP8004H$",
"^QW100-61$",
NULL,
vendoropts_9_halfminutes,
specialpurpose_reverse_samsung,
same_as_minus_F
},
{ "SAMSUNG SpinPoint T133 series", // tested with HD300LJ/ZT100-12, HD400LJ/ZZ100-14, HD401LJ/ZZ100-15
"^SAMSUNG HD(250KD|(30[01]|320|40[01])L[DJ])$",
".*",
NULL, NULL, NULL, NULL
},
{ "SAMSUNG SpinPoint P120 series", // tested with SP2504C/VT100-33
"^SAMSUNG SP(16[01]3|2[05][01]4)[CN]$",
".*",
NULL, NULL, NULL, NULL
},
{ "SAMSUNG SpinPoint P80 SD series", // tested with HD160JJ/ZM100-33
"^SAMSUNG HD(080H|120I|160J)J$",
".*",
NULL, NULL, NULL, NULL
},
{ "SAMSUNG SpinPoint P80 series", // firmware *-26 or later, tested with SP1614C/SW100-34
"^SAMSUNG SP(0451|08[0124]2|12[0145]3|16[0145]4)[CN]$",
".*-(2[6789]|3[0-9])$",
NULL,
vendoropts_9_halfminutes,
NULL, NULL
},
{
NULL, // Any other Samsung disk with *-23 *-24 firmware
// SAMSUNG SP1213N (TL100-23 firmware)
// SAMSUNG SP0802N (TK100-23 firmware)
// Samsung SP1604N, tested with FW TM100-23 and TM100-24
"^SAMSUNG .*$",
".*-2[34]$",
NULL,
vendoropts_Samsung_SV4012H,
specialpurpose_reverse_samsung2,
same_as_minus_F2
},
{ NULL, // All Samsung drives with '.*-25' firmware
"^SAMSUNG.*",
".*-25$",
may_need_minus_F2_disabled,
vendoropts_Samsung_SV4012H,
specialpurpose_reverse_samsung2,
same_as_minus_F2
},
{ NULL, // All Samsung drives with '.*-26 or later (currently to -39)' firmware
"^SAMSUNG.*",
".*-(2[6789]|3[0-9])$",
NULL,
vendoropts_Samsung_SV4012H,
NULL,
NULL
},
{ NULL, // Samsung ALL OTHER DRIVES
"^SAMSUNG.*",
".*",
may_need_minus_F_enabled,
NULL, NULL, NULL
},
{ "Maxtor Fireball 541DX family",
"^Maxtor 2B0(0[468]|1[05]|20)H1$",
".*",
NULL,
vendoropts_Maxtor_4D080H4,
NULL, NULL
},
{ "Maxtor Fireball 3 family",
"^Maxtor 2F0[234]0[JL]0$",
".*",
NULL,
vendoropts_9_minutes,
NULL, NULL
},
{ "Maxtor DiamondMax 2160 Ultra ATA family",
"^Maxtor 8(2160D2|3228D3|3240D3|4320D4|6480D6|8400D8|8455D8)$",
".*",
NULL,
vendoropts_9_minutes,
NULL, NULL
},
{ "Maxtor DiamondMax 2880 Ultra ATA family",
"^Maxtor 9(0510D4|0576D4|0648D5|0720D5|0840D6|0845D6|0864D6|1008D7|1080D8|1152D8)$",
".*",
NULL,
vendoropts_9_minutes,
NULL, NULL
},
{ "Maxtor DiamondMax 3400 Ultra ATA family",
"^Maxtor 9(1(360|350|202)D8|1190D7|10[12]0D6|0840D5|06[48]0D4|0510D3|1(350|202)E8|1010E6|0840E5|0640E4)$",
".*",
NULL,
vendoropts_9_minutes,
NULL, NULL
},
{ "Maxtor DiamondMax D540X-4G family",
"^Maxtor 4G(120J6|160J[68])$",
".*",
NULL,
vendoropts_Maxtor_4D080H4,
NULL, NULL
},
{ "Maxtor DiamondMax D540X-4K family",
"^MAXTOR 4K(020H1|040H2|060H3|080H4)$",
".*",
NULL, NULL, NULL, NULL
},
{ "Maxtor DiamondMax Plus D740X family",
"^MAXTOR 6L0(20[JL]1|40[JL]2|60[JL]3|80[JL]4)$",
".*",
NULL, NULL, NULL, NULL
},
{ "Maxtor DiamondMax Plus 5120 Ultra ATA 33 family",
"^Maxtor 9(0512D2|0680D3|0750D3|0913D4|1024D4|1360D6|1536D6|1792D7|2048D8)$",
".*",
NULL,
vendoropts_9_minutes,
NULL, NULL
},
{ "Maxtor DiamondMax Plus 6800 Ultra ATA 66 family",
"^Maxtor 9(2732U8|2390U7|2049U6|1707U5|1366U4|1024U3|0845U3|0683U2)$",
".*",
NULL,
vendoropts_9_minutes,
NULL, NULL
},
{ "Maxtor DiamondMax D540X-4D",
"^Maxtor 4D0(20H1|40H2|60H3|80H4)$",
".*",
NULL,
vendoropts_Maxtor_4D080H4,
NULL, NULL
},
{ "Maxtor DiamondMax 16 family",
"^Maxtor 4(R0[68]0[JL]0|R1[26]0L0|A160J0|R120L4)$",
".*",
NULL,
vendoropts_9_minutes,
NULL, NULL
},
{ "Maxtor DiamondMax 4320 Ultra ATA family",
"^Maxtor (91728D8|91512D7|91303D6|91080D5|90845D4|90645D3|90648D[34]|90432D2)$",
".*",
NULL,
vendoropts_9_minutes,
NULL, NULL
},
{ "Maxtor DiamondMax 17 VL family",
"^Maxtor 9(0431U1|0641U2|0871U2|1301U3|1741U4)$",
".*",
NULL,
vendoropts_9_minutes,
NULL, NULL
},
{ "Maxtor DiamondMax 20 VL family",
"^Maxtor (94091U8|93071U6|92561U5|92041U4|91731U4|91531U3|91361U3|91021U2|90841U2|90651U2)$",
".*",
NULL,
vendoropts_9_minutes,
NULL, NULL
},
{ "Maxtor DiamondMax VL 30 family",
"^Maxtor (33073U4|32049U3|31536U2|30768U1)$",
".*",
NULL,
vendoropts_9_minutes,
NULL, NULL
},
{ "Maxtor DiamondMax 36 family",
"^Maxtor (93652U8|92739U6|91826U4|91369U3|90913U2|90845U2|90435U1)$",
".*",
NULL,
vendoropts_9_minutes,
NULL, NULL
},
{ "Maxtor DiamondMax 40 ATA 66 series",
"^Maxtor 9(0684U2|1024U2|1362U3|1536U3|2049U4|2562U5|3073U6|4098U8)$",
".*",
NULL,
vendoropts_9_minutes,
NULL, NULL
},
{ "Maxtor DiamondMax Plus 40 series (Ultra ATA 66 and Ultra ATA 100)",
"^Maxtor (54098[UH]8|53073[UH]6|52732[UH]6|52049[UH]4|51536[UH]3|51369[UH]3|51024[UH]2)$",
".*",
NULL,
vendoropts_9_minutes,
NULL, NULL
},
{ "Maxtor DiamondMax 40 VL Ultra ATA 100 series",
"^Maxtor 3(1024H1|1535H2|2049H2|3073H3|4098H4)( B)?$",
".*",
NULL,
vendoropts_9_minutes,
NULL, NULL
},
{ "Maxtor DiamondMax Plus 45 Ulta ATA 100 family",
"^Maxtor 5(4610H6|4098H6|3073H4|2049H3|1536H2|1369H2|1023H2)$",
".*",
NULL,
vendoropts_9_minutes,
NULL, NULL
},
{ "Maxtor DiamondMax 60 ATA 66 family",
"^Maxtor 9(1023U2|1536U2|2049U3|2305U3|3073U4|4610U6|6147U8)$",
".*",
NULL,
vendoropts_9_minutes,
NULL, NULL
},
{ "Maxtor DiamondMax 60 ATA 100 family",
"^Maxtor 9(1023H2|1536H2|2049H3|2305H3|3073H4|4610H6|6147H8)$",
".*",
NULL,
vendoropts_9_minutes,
NULL, NULL
},
{ "Maxtor DiamondMax Plus 60 family",
"^Maxtor 5T0(60H6|40H4|30H3|20H2|10H1)$",
".*",
NULL,
vendoropts_9_minutes,
NULL, NULL
},
{ "Maxtor DiamondMax 80 family",
"^Maxtor (98196H8|96147H6)$",
".*",
NULL,
vendoropts_9_minutes,
NULL, NULL
},
{ "Maxtor DiamondMax 536DX family",
"^Maxtor 4W(100H6|080H6|060H4|040H3|030H2)$",
".*",
NULL,
vendoropts_9_minutes,
NULL, NULL
},
{ "Maxtor DiamondMax Plus 8 family",
"^Maxtor 6(E0[234]|K04)0L0$",
".*",
NULL,
vendoropts_9_minutes,
NULL, NULL
},
{ "Maxtor DiamondMax 10 family (ATA/133 and SATA/150)",
"^Maxtor 6(B(30|25|20|16|12|08)0[MPRS]|L(080[MLP]|(100|120)[MP]|160[MP]|200[MPRS]|250[RS]|300[RS]))0$",
".*",
NULL,
vendoropts_9_minutes,
NULL, NULL
},
{ "Maxtor DiamondMax 10 family (SATA/300)",
"^Maxtor 6V(080E|160E|200E|250F|300F|320F)0$",
".*",
NULL, NULL, NULL, NULL
},
{ "Maxtor DiamondMax Plus 9 family",
"^Maxtor 6Y((060|080|120|160)L0|(060|080|120|160|200|250)P0|(060|080|120|160|200|250)M0)$",
".*",
NULL,
vendoropts_9_minutes,
NULL, NULL
},
{ "Maxtor DiamondMax 11 family",
"^Maxtor 6H[45]00[FR]0$",
".*",
NULL, NULL, NULL, NULL
},
{ "Maxtor MaXLine Plus II",
"^Maxtor 7Y250[PM]0$",
".*",
NULL,
vendoropts_9_minutes,
NULL, NULL
},
{ "Maxtor MaXLine II family",
"^Maxtor [45]A(25|30|32)0[JN]0$",
".*",
NULL,
vendoropts_9_minutes,
NULL, NULL
},
{ "Maxtor MaXLine III family (ATA/133 and SATA/150)",
"^Maxtor 7L(25|30)0[SR]0$",
".*",
NULL,
vendoropts_9_minutes,
NULL, NULL
},
{ "Maxtor MaXLine III family (SATA/300)",
"^Maxtor 7V(25|30)0F0$",
".*",
NULL, NULL, NULL, NULL
},
{ "Maxtor MaXLine Pro 500 family", // There is also a 7H500R0 model, but I
"^Maxtor 7H500F0$", // haven't added it because I suspect
".*", // it might need vendoropts_9_minutes
NULL, NULL, NULL, NULL // and nobody has submitted a report yet
},
{ NULL, // HITACHI_DK14FA-20B
"^HITACHI_DK14FA-20B$",
".*",
NULL,
vendoropts_Hitachi_DK23XX,
NULL, NULL
},
{ "HITACHI Travelstar DK23XX/DK23XXB series",
"^HITACHI_DK23..-..B?$",
".*",
NULL,
vendoropts_Hitachi_DK23XX,
NULL, NULL
},
{ "Hitachi Endurastar J4K20/N4K20 (formerly DK23FA-20J)",
"^(HITACHI_DK23FA-20J|HTA422020F9AT[JN]0)$",
".*",
NULL,
vendoropts_Hitachi_DK23XX,
NULL, NULL
},
{ "IBM Deskstar 14GXP and 16GP series",
"^IBM-DTTA-3(7101|7129|7144|5032|5043|5064|5084|5101|5129|5168)0$",
".*",
NULL, NULL, NULL, NULL
},
{ "IBM Deskstar 25GP and 22GXP family",
"^IBM-DJNA-3(5(101|152|203|250)|7(091|135|180|220))0$",
".*",
NULL, NULL, NULL, NULL
},
{ "IBM Travelstar 4GT family",
"^IBM-DTCA-2(324|409)0$",
".*",
NULL, NULL, NULL, NULL
},
{ "IBM Travelstar 25GS, 18GT, and 12GN family",
"^IBM-DARA-2(25|18|15|12|09|06)000$",
".*",
NULL, NULL, NULL, NULL
},
{ "IBM Travelstar 48GH, 30GN, and 15GN family",
"^(IBM-|Hitachi )?IC25(T048ATDA05|N0(30|20|15|12|10|07|06|05)ATDA04)-.$",
".*",
NULL, NULL, NULL, NULL
},
{ "IBM Travelstar 32GH, 30GT, and 20GN family",
"^IBM-DJSA-2(32|30|20|10|05)$",
".*",
NULL, NULL, NULL, NULL
},
{ "IBM Travelstar 4GN family",
"^IBM-DKLA-2(216|324|432)0$",
".*",
NULL, NULL, NULL, NULL
},
{ "IBM Deskstar 37GP and 34GXP family",
"^IBM-DPTA-3(5(375|300|225|150)|7(342|273|205|136))0$",
".*",
NULL, NULL, NULL, NULL
},
{ "IBM/Hitachi Travelstar 60GH and 40GN family",
"^(IBM-|Hitachi )?IC25(T060ATC[SX]05|N0[4321]0ATC[SX]04)-.$",
".*",
NULL, NULL, NULL, NULL
},
{ "IBM/Hitachi Travelstar 40GNX family",
"^(IBM-|Hitachi )?IC25N0[42]0ATC[SX]05-.$",
".*",
NULL, NULL, NULL, NULL
},
{ "Hitachi Travelstar 80GN family",
"^(Hitachi )?IC25N0[23468]0ATMR04-.$",
".*",
NULL, NULL, NULL, NULL
},
{ "Hitachi Travelstar 5K80 family",
"^HTS5480[8642]0M9AT00$",
".*",
NULL, NULL, NULL, NULL
},
{ "Hitachi Travelstar 5K100 series",
"^HTS5410[1864]0G9(AT|SA)00$",
".*",
NULL, NULL, NULL, NULL
},
{ "Hitachi Travelstar E5K100 series",
"^HTE541040G9(AT|SA)00$",
".*",
NULL, NULL, NULL, NULL
},
{ "Hitachi Travelstar 7K60",
"^HTS726060M9AT00$",
".*",
NULL, NULL, NULL, NULL
},
{ "Hitachi Travelstar 7K100",
"^HTS7210[168]0G9(AT|SA)00$",
".*",
NULL, NULL, NULL, NULL
},
{ "Hitachi Travelstar E7K100",
"^HTE7210[168]0G9(AT|SA)00$",
".*",
NULL, NULL, NULL, NULL
},
{ "Hitachi Travelstar E7K60 family",
"^HTE7260[46]0M9AT00$",
".*",
NULL, NULL, NULL, NULL
},
{ "IBM/Hitachi Deskstar 120GXP family",
"^(IBM-)?IC35L((020|040|060|080|120)AVVA|0[24]0AVVN)07-[01]$",
".*",
NULL, NULL, NULL, NULL
},
{ "IBM/Hitachi Deskstar GXP-180 family",
"^(IBM-)?IC35L(030|060|090|120|180)AVV207-[01]$",
".*",
NULL, NULL, NULL, NULL
},
{ "IBM Travelstar 14GS",
"^IBM-DCYA-214000$",
".*",
NULL, NULL, NULL, NULL
},
{ "IBM Travelstar 4LP",
"^IBM-DTNA-2(180|216)0$",
".*",
NULL, NULL, NULL, NULL
},
{ "Hitachi Deskstar 7K80 series",
"^(Hitachi )?HDS7280([48]0PLAT20|(40)?PLA320|80PLA380)$",
".*",
NULL, NULL, NULL, NULL
},
{ "Hitachi Deskstar 7K250 series",
"^(Hitachi )?HDS7225((40|80|12|16)VLAT20|(12|16|25)VLAT80|(80|12|16|25)VLSA80)$",
".*",
NULL, NULL, NULL, NULL
},
{ "Hitachi Deskstar T7K250 series",
"^(Hitachi )?HDT7225((25|20|16)DLA(T80|380))$",
".*",
NULL, NULL, NULL, NULL
},
{ "Hitachi Deskstar 7K400 series",
"^(Hitachi )?HDS724040KL(AT|SA)80$",
".*",
NULL, NULL, NULL, NULL
},
{ "Hitachi Deskstar 7K500 series",
"^(Hitachi )?HDS725050KLA(360|T80)$",
".*",
NULL, NULL, NULL, NULL
},
{ "Toshiba 2.5\" HDD series (30-60 GB)",
"^TOSHIBA MK((6034|4032)GSX|(6034|4032)GAX|(6026|4026|4019|3019)GAXB?|(6025|6021|4025|4021|4018|3021|3018)GAS|(4036|3029)GACE?|(4018|3017)GAP)$",
".*",
NULL, NULL, NULL, NULL
},
{ "Toshiba 2.5\" HDD series (80 GB and above)",
"^TOSHIBA MK(80(25GAS|26GAX|32GAX|32GSX)|10(31GAS|32GAX)|12(33GAS|34G[AS]X)|2035GSS)$",
".*",
NULL, NULL, NULL, NULL
},
{ NULL, // TOSHIBA MK6022GAX
"^TOSHIBA MK6022GAX$",
".*",
NULL, NULL, NULL, NULL
},
{ NULL, // TOSHIBA MK6409MAV
"^TOSHIBA MK6409MAV$",
".*",
NULL, NULL, NULL, NULL
},
{ NULL, // TOS MK3019GAXB SUN30G
"^TOS MK3019GAXB SUN30G$",
".*",
NULL, NULL, NULL, NULL
},
{ NULL, // TOSHIBA MK2016GAP, MK2017GAP, MK2018GAP, MK2018GAS, MK2023GAS
"^TOSHIBA MK20(1[678]GAP|(18|23)GAS)$",
".*",
NULL, NULL, NULL, NULL
},
{ "Seagate Momentus family",
"^ST9(20|28|40|48)11A$",
".*",
NULL, NULL, NULL, NULL
},
{ "Seagate Momentus 42 family",
"^ST9(2014|3015|4019)A$",
".*",
NULL, NULL, NULL, NULL
},
{ "Seagate Momentus 4200.2 Series",
"^ST9(100822|808210|60821|50212|402113|30219)A$",
".*",
NULL, NULL, NULL, NULL
},
{ "Seagate Momentus 5400.2 series",
"^ST9(808211|60822|408114|308110|120821|10082[34]|8823|6812|4813|3811)AS?$",
".*",
NULL, NULL, NULL, NULL
},
{ "Seagate Momentus 7200.1 series",
"^ST9(10021|80825|6023|4015)AS?$",
".*",
NULL, NULL, NULL, NULL
},
{ "Seagate Medalist 2110, 3221, 4321, 6531, and 8641",
"^ST3(2110|3221|4321|6531|8641)A$",
".*",
NULL, NULL, NULL, NULL
},
{ "Seagate U Series X family",
"^ST3(10014A(CE)?|20014A)$",
".*",
NULL, NULL, NULL, NULL
},
{ "Seagate U7 family",
"^ST3(30012|40012|60012|80022|120020)A$",
".*",
NULL, NULL, NULL, NULL
},
{ "Seagate U Series 6 family",
"^ST3(8002|6002|4081|3061|2041)0A$",
".*",
NULL, NULL, NULL, NULL
},
{ "Seagate U Series 5 family",
"^ST3(40823|30621|20413|15311|10211)A$",
".*",
NULL, NULL, NULL, NULL
},
{ "Seagate U4 family",
"^ST3(2112|4311|6421|8421)A$",
".*",
NULL, NULL, NULL, NULL
},
{ "Seagate U8 family",
"^ST3(8410|4313|17221|13021)A$",
".*",
NULL, NULL, NULL, NULL
},
{ "Seagate U10 family",
"^ST3(20423|15323|10212)A$",
".*",
NULL, NULL, NULL, NULL
},
{ "Seagate Barracuda ATA II family",
"^ST3(3063|2042|1532|1021)0A$",
".*",
NULL, NULL, NULL, NULL
},
{ "Seagate Barracuda ATA III family",
"^ST3(40824|30620|20414|15310|10215)A$",
".*",
NULL, NULL, NULL, NULL
},
{ "Seagate Barracuda ATA IV family",
"^ST3(20011|30011|40016|60021|80021)A$",
".*",
NULL, NULL, NULL, NULL
},
{ "Seagate Barracuda ATA V family",
"^ST3(12002(3A|4A|9A|3AS)|800(23A|15A|23AS)|60(015A|210A)|40017A)$",
".*",
NULL, NULL, NULL, NULL
},
{ "Seagate Barracuda 5400.1",
"^ST340015A$",
".*",
NULL, NULL, NULL, NULL
},
{ "Seagate Barracuda 7200.7 and 7200.7 Plus family",
"^ST3(200021A|200822AS?|16002[13]AS?|12002[26]AS?|1[26]082[78]AS|8001[13]AS?|80817AS|60014A|40111AS|40014AS?)$",
".*",
NULL, NULL, NULL, NULL
},
{ "Seagate Barracuda 7200.8 family",
"^ST3(400[68]32|300[68]31|250[68]23|200826)AS?$",
".*",
NULL, NULL, NULL, NULL
},
{ "Seagate Barracuda 7200.9 family",
"^ST3(500[68]41|400[68]33|300[68]22|250[68]24|250[68]24|200827|160[28]12|120814|120[28]13|80[28]110|402111)AS?$",
".*",
NULL, NULL, NULL, NULL
},
{ "Seagate Barracuda 7200.10 family",
"^ST3(750[68]4|500[68]3|400[68]2|320[68]2|300[68]2|250[68]2|20082)0AS?$",
".*",
NULL, NULL, NULL, NULL
},
{ "Seagate Medalist 17240, 13030, 10231, 8420, and 4310",
"^ST3(17240|13030|10231|8420|4310)A$",
".*",
NULL, NULL, NULL, NULL
},
{ "Seagate Medalist 17242, 13032, 10232, 8422, and 4312",
"^ST3(1724|1303|1023|842|431)2A$",
".*",
NULL, NULL, NULL, NULL
},
{ "Seagate NL35 family",
"^ST3(250623|250823|400632|400832|250824|250624|400633|400833|500641|500841)NS$",
".*",
NULL, NULL, NULL, NULL
},
{ "Western Digital Protege",
/* Western Digital drives with this comment all appear to use Attribute 9 in
* a non-standard manner. These entries may need to be updated when it
* is understood exactly how Attribute 9 should be interpreted.
* UPDATE: this is probably explained by the WD firmware bug described in the
* smartmontools FAQ */
"^WDC WD([2468]00E|1[26]00A)B-.*$",
".*",
NULL, NULL, NULL, NULL
},
{ "Western Digital Caviar family",
/* Western Digital drives with this comment all appear to use Attribute 9 in
* a non-standard manner. These entries may need to be updated when it
* is understood exactly how Attribute 9 should be interpreted.
* UPDATE: this is probably explained by the WD firmware bug described in the
* smartmontools FAQ */
"^WDC WD(2|3|4|6|8|10|12|16|18|20|25)00BB-.*$",
".*",
NULL, NULL, NULL, NULL
},
{ "Western Digital Caviar WDxxxAB series",
/* Western Digital drives with this comment all appear to use Attribute 9 in
* a non-standard manner. These entries may need to be updated when it
* is understood exactly how Attribute 9 should be interpreted.
* UPDATE: this is probably explained by the WD firmware bug described in the
* smartmontools FAQ */
"^WDC WD(3|4|6)00AB-.*$",
".*",
NULL, NULL, NULL, NULL
},
{ "Western Digital Caviar WDxxxAA series",
/* Western Digital drives with this comment all appear to use Attribute 9 in
* a non-standard manner. These entries may need to be updated when it
* is understood exactly how Attribute 9 should be interpreted.
* UPDATE: this is probably explained by the WD firmware bug described in the
* smartmontools FAQ */
"^WDC WD...?AA(-.*)?$",
".*",
NULL, NULL, NULL, NULL
},
{ "Western Digital Caviar WDxxxBA series",
/* Western Digital drives with this comment all appear to use Attribute 9 in
* a non-standard manner. These entries may need to be updated when it
* is understood exactly how Attribute 9 should be interpreted.
* UPDATE: this is probably explained by the WD firmware bug described in the
* smartmontools FAQ */
"^WDC WD...BA$",
".*",
NULL, NULL, NULL, NULL
},
{ NULL, // Western Digital Caviar AC12500, AC14300, AC23200, AC24300, AC25100,
// AC36400, AC38400
"^WDC AC(125|143|232|243|251|364|384)00.?",
".*",
NULL, NULL, NULL, NULL
},
{ "Western Digital Caviar Serial ATA family",
"^WDC WD(4|8|20|32)00BD-.*$",
".*",
NULL, NULL, NULL, NULL
},
{ "Western Digital Caviar SE family",
/* Western Digital drives with this comment all appear to use Attribute 9 in
* a non-standard manner. These entries may need to be updated when it
* is understood exactly how Attribute 9 should be interpreted.
* UPDATE: this is probably explained by the WD firmware bug described in the
* smartmontools FAQ */
"^WDC WD((4|6|8|10|12|16|18|20|25|30|32)00JB|(12|20|25)00PB)-.*$",
".*",
NULL, NULL, NULL, NULL
},
{ "Western Digital Caviar SE (Serial ATA) family",
"^WDC WD((4|8|12|16|20|25|32)00[JP]D|(12|16|20|25|30|32)00JS|1600AAJS)-.*$",
".*",
NULL, NULL, NULL, NULL
},
{ "Western Digital Caviar SE16 family",
"^WDC WD((25|32|40|50)00KS|4000KD)-.*$",
".*",
NULL, NULL, NULL, NULL
},
{ "Western Digital Caviar RE Serial ATA series",
"^WDC WD((12|16|25|32)00SD|2500YD|4000Y[RS]|5000YS)-.*$",
".*",
NULL, NULL, NULL, NULL
},
{ "Western Digital Raptor family",
"^WDC WD((360|740|800)GD|(360|740|1500)ADFD)-.*$",
".*",
NULL, NULL, NULL, NULL
},
{ "Western Digital Scorpio family",
"^WDC WD((12|10|8|6|4)00(UE|VE|BEAS|BEVS))-.*$",
".*",
NULL, NULL, NULL, NULL
},
{ NULL, // QUANTUM BIGFOOT TS10.0A
"^QUANTUM BIGFOOT TS10.0A$",
".*",
NULL, NULL, NULL, NULL
},
{ NULL, // QUANTUM FIREBALLlct15 20 and QUANTUM FIREBALLlct15 30
"^QUANTUM FIREBALLlct15 [123]0$",
".*",
NULL, NULL, NULL, NULL
},
{ "QUANTUM FIREBALLlct20 series",
"^QUANTUM FIREBALLlct20 [234]0$",
".*",
NULL, NULL, NULL, NULL
},
{ NULL, // QUANTUM FIREBALL CX10.2A
"^QUANTUM FIREBALL CX10.2A$",
".*",
NULL, NULL, NULL, NULL
},
{ "Quantum Fireball Plus LM series",
"^QUANTUM FIREBALLP LM(10.2|15|20.5|30)$",
".*",
NULL, NULL, NULL, NULL
},
{ "Quantum Fireball CR series",
"^QUANTUM FIREBALL CR(4.3|8.4)A$",
".*",
NULL, NULL, NULL, NULL
},
{ NULL, // QUANTUM FIREBALLP AS10.2, AS20.5, AS30.0, and AS40.0
"^QUANTUM FIREBALLP AS(10.2|20.5|30.0|40.0)$",
".*",
NULL, NULL, NULL, NULL
},
{ NULL, // QUANTUM FIREBALL EX6.4A
"^QUANTUM FIREBALL EX6.4A$",
".*",
NULL, NULL, NULL, NULL
},
{ NULL, // QUANTUM FIREBALL ST3.2A
"^QUANTUM FIREBALL ST(3.2|4.3)A$",
".*",
NULL, NULL, NULL, NULL
},
{ NULL, // QUANTUM FIREBALL EX3.2A
"^QUANTUM FIREBALL EX3.2A$",
".*",
NULL, NULL, NULL, NULL
},
{ NULL, // QUANTUM FIREBALLP KX27.3
"^QUANTUM FIREBALLP KX27.3$",
".*",
NULL, NULL, NULL, NULL
},
{ "Quantum Fireball Plus KA series",
"^QUANTUM FIREBALLP KA(9|10).1$",
".*",
NULL, NULL, NULL, NULL
},
{ "Quantum Fireball SE series",
"^QUANTUM FIREBALL SE4.3A$",
".*",
NULL, NULL, NULL, NULL
},
/*------------------------------------------------------------
* End of table. Do not add entries below this marker.
*------------------------------------------------------------ */
{NULL, NULL, NULL, NULL, NULL, NULL, NULL}
};
// Searches knowndrives[] for a drive with the given model number and firmware
// string. If either the drive's model or firmware strings are not set by the
// manufacturer then values of NULL may be used. Returns the index of the
// first match in knowndrives[] or -1 if no match if found.
int lookupdrive(const char *model, const char *firmware)
{
regex_t regex;
int i, index;
const char *empty = "";
model = model ? model : empty;
firmware = firmware ? firmware : empty;
for (i = 0, index = -1; index == -1 && knowndrives[i].modelregexp; i++) {
// Attempt to compile regular expression.
if (compileregex(®ex, knowndrives[i].modelregexp, REG_EXTENDED))
goto CONTINUE;
// Check whether model matches the regular expression in knowndrives[i].
if (!regexec(®ex, model, 0, NULL, 0)) {
// model matches, now check firmware.
if (!knowndrives[i].firmwareregexp)
// The firmware regular expression in knowndrives[i] is NULL, which is
// considered a match.
index = i;
else {
// Compare firmware against the regular expression in knowndrives[i].
regfree(®ex); // Recycle regex.
if (compileregex(®ex, knowndrives[i].firmwareregexp, REG_EXTENDED))
goto CONTINUE;
if (!regexec(®ex, firmware, 0, NULL, 0))
index = i;
}
}
CONTINUE:
regfree(®ex);
}
return index;
}
// Shows all presets for drives in knowndrives[].
void showonepreset(const drivesettings *drivetable){
const unsigned char (* presets)[2] = drivetable->vendoropts;
int first_preset = 1;
// Basic error check
if (!drivetable || !drivetable->modelregexp){
pout("Null known drive table pointer. Please report\n"
"this error to smartmontools developers at " PACKAGE_BUGREPORT ".\n");
return;
}
// print model and firmware regular expressions
pout("%-*s %s\n", TABLEPRINTWIDTH, "MODEL REGEXP:", drivetable->modelregexp);
pout("%-*s %s\n", TABLEPRINTWIDTH, "FIRMWARE REGEXP:", drivetable->firmwareregexp ?
drivetable->firmwareregexp : "");
pout("%-*s %s\n", TABLEPRINTWIDTH, "MODEL FAMILY:", drivetable->modelfamily ?
drivetable->modelfamily : "");
// if there are any presets, then show them
if (presets && (*presets)[0]) while (1) {
char out[256];
const int attr = (*presets)[0], val = (*presets)[1];
unsigned char fakearray[MAX_ATTRIBUTE_NUM];
// if we are at the end of the attribute list, break out
if (!attr)
break;
// This is a hack. ataPrintSmartAttribName() needs a pointer to an
// "array" to dereference, so we provide such a pointer.
fakearray[attr]=val;
ataPrintSmartAttribName(out, attr, fakearray);
// Use leading zeros instead of spaces so that everything lines up.
out[0] = (out[0] == ' ') ? '0' : out[0];
out[1] = (out[1] == ' ') ? '0' : out[1];
pout("%-*s %s\n", TABLEPRINTWIDTH, first_preset ? "ATTRIBUTE OPTIONS:" : "", out);
first_preset = 0;
presets++;
}
else
pout("%-*s %s\n", TABLEPRINTWIDTH, "ATTRIBUTE OPTIONS:", "None preset; no -v options are required.");
// Is a special purpose function defined? If so, describe it
if (drivetable->specialpurpose){
pout("%-*s ", TABLEPRINTWIDTH, "OTHER PRESETS:");
pout("%s\n", drivetable->functiondesc ?
drivetable->functiondesc : "A special purpose function "
"is defined for this drive");
}
// Print any special warnings
if (drivetable->warningmsg){
pout("%-*s ", TABLEPRINTWIDTH, "WARNINGS:");
pout("%s\n", drivetable->warningmsg);
}
return;
}
// Shows all presets for drives in knowndrives[].
// Returns <0 on syntax error in regular expressions.
int showallpresets(void){
int i;
int rc = 0;
regex_t regex;
// loop over all entries in the knowndrives[] table, printing them
// out in a nice format
for (i=0; knowndrives[i].modelregexp; i++){
showonepreset(&knowndrives[i]);
pout("\n");
}
// Check all regular expressions
for (i=0; knowndrives[i].modelregexp; i++){
if (compileregex(®ex, knowndrives[i].modelregexp, REG_EXTENDED))
rc = -1;
if (knowndrives[i].firmwareregexp) {
if (compileregex(®ex, knowndrives[i].firmwareregexp, REG_EXTENDED))
rc = -1;
}
}
pout("For information about adding a drive to the database see the FAQ on the\n");
pout("smartmontools home page: " PACKAGE_HOMEPAGE "\n");
return rc;
}
// Shows all matching presets for a drive in knowndrives[].
// Returns # matching entries.
int showmatchingpresets(const char *model, const char *firmware){
int i;
int cnt = 0;
const char * firmwaremsg = (firmware ? firmware : "(any)");
regex_t regex;
for (i=0; knowndrives[i].modelregexp; i++){
if (i > 0)
regfree(®ex);
if (compileregex(®ex, knowndrives[i].modelregexp, REG_EXTENDED))
continue;
if (regexec(®ex, model, 0, NULL, 0))
continue;
if (firmware && knowndrives[i].firmwareregexp) {
regfree(®ex);
if (compileregex(®ex, knowndrives[i].firmwareregexp, REG_EXTENDED))
continue;
if (regexec(®ex, firmware, 0, NULL, 0))
continue;
}
if (++cnt == 1)
pout("Drive found in smartmontools Database. Drive identity strings:\n"
"%-*s %s\n"
"%-*s %s\n"
"match smartmontools Drive Database entry:\n",
TABLEPRINTWIDTH, "MODEL:", model, TABLEPRINTWIDTH, "FIRMWARE:", firmwaremsg);
else if (cnt == 2)
pout("and match these additional entries:\n");
showonepreset(&knowndrives[i]);
pout("\n");
}
regfree(®ex);
if (cnt == 0)
pout("No presets are defined for this drive. Its identity strings:\n"
"MODEL: %s\n"
"FIRMWARE: %s\n"
"do not match any of the known regular expressions.\n",
model, firmwaremsg);
return cnt;
}
// Shows the presets (if any) that are available for the given drive.
void showpresets(const struct ata_identify_device *drive){
int i;
char model[MODEL_STRING_LENGTH+1], firmware[FIRMWARE_STRING_LENGTH+1];
// get the drive's model/firmware strings
formatdriveidstring(model, (char *)drive->model, MODEL_STRING_LENGTH);
formatdriveidstring(firmware, (char *)drive->fw_rev, FIRMWARE_STRING_LENGTH);
// and search to see if they match values in the table
if ((i = lookupdrive(model, firmware)) < 0) {
// no matches found
pout("No presets are defined for this drive. Its identity strings:\n"
"MODEL: %s\n"
"FIRMWARE: %s\n"
"do not match any of the known regular expressions.\n"
"Use -P showall to list all known regular expressions.\n",
model, firmware);
return;
}
// We found a matching drive. Print out all information about it.
pout("Drive found in smartmontools Database. Drive identity strings:\n"
"%-*s %s\n"
"%-*s %s\n"
"match smartmontools Drive Database entry:\n",
TABLEPRINTWIDTH, "MODEL:", model, TABLEPRINTWIDTH, "FIRMWARE:", firmware);
showonepreset(&knowndrives[i]);
return;
}
// Sets preset vendor attribute options in opts by finding the entry
// (if any) for the given drive in knowndrives[]. Values that have
// already been set in opts will not be changed. Returns <0 if drive
// not recognized else index >=0 into drive database.
int applypresets(const struct ata_identify_device *drive, unsigned char **optsptr,
smartmonctrl *con) {
int i;
unsigned char *opts;
char model[MODEL_STRING_LENGTH+1], firmware[FIRMWARE_STRING_LENGTH+1];
if (*optsptr==NULL)
bytes+=MAX_ATTRIBUTE_NUM;
if (*optsptr==NULL && !(*optsptr=(unsigned char *)calloc(MAX_ATTRIBUTE_NUM,1))){
pout("Unable to allocate memory in applypresets()");
bytes-=MAX_ATTRIBUTE_NUM;
EXIT(1);
}
opts=*optsptr;
// get the drive's model/firmware strings
formatdriveidstring(model, (char *)drive->model, MODEL_STRING_LENGTH);
formatdriveidstring(firmware, (char *)drive->fw_rev, FIRMWARE_STRING_LENGTH);
// Look up the drive in knowndrives[].
if ((i = lookupdrive(model, firmware)) >= 0) {
// if vendoropts is non-NULL then Attribute interpretation presets
if (knowndrives[i].vendoropts) {
const unsigned char (* presets)[2];
// For each attribute in list of attribute/val pairs...
presets = knowndrives[i].vendoropts;
while (1) {
const int attr = (*presets)[0];
const int val = (*presets)[1];
if (!attr)
break;
// ... set attribute if user hasn't already done so.
if (!opts[attr])
opts[attr] = val;
presets++;
}
}
// If a special-purpose function is defined for this drive then
// call it. Note that if command line arguments or Directives
// over-ride this choice, then the specialpurpose function that is
// called must deal with this.
if (knowndrives[i].specialpurpose)
(*knowndrives[i].specialpurpose)(con);
}
// return <0 if drive wasn't recognized, or index>=0 into database
// if it was
return i;
}
syntax highlighted by Code2HTML, v. 0.9.1