lzop - compress or expand files lzop is a file compressor very similar to gzip. lzop favors speed over compression ratio. lzop [ command ] [ options ] [ filename ... ] lzop [-dxlthIVL19] [-qvcfFnNkU] [-o file] [-p[path]] [-S suffix] [filename ...] lzop reduces the size of the named files. Whenever possible, each file is compressed into one with the extension .lzo, while keeping the same ownership modes, access and modification times. If no files are specified, or if a file name is "-", lzop tries to compress the standard input to the standard output. lzop will only attempt to compress regular files. In particular, it will ignore directories and symbolic links. If the compressed file name is too long for its file system, lzop truncates it. Compressed files can be restored to their original form using lzop -d. lzop -d takes a list of files on its command line and decompresses each file whose name ends with .lzo and which begins with the correct magic number to an uncompressed file without the original extension. lzop -d also recognizes the special extension .tzo as shorthand for .tar.lzo. When compressing, lzop uses the .tzo extension if necessary instead of truncating a file with a .tar extension. lzop stores the original file name, mode and time stamp in the compressed file. These can be used when decompressing the file with the -d option. This is useful when the compressed file name was truncated or when the time stamp was not preserved after a file transfer. lzop preserves the ownership, mode and time stamp of files when compressing. When decompressing lzop restores the mode and time stamp if present in the compressed files. See the options -n, -N, --no-mode and --no-time for more information. lzop always keeps original files unchanged unless you use the option -U. lzop uses the LZO data compression library for compression services. The amount of compression obtained depends on the size of the input and the distribution of common substrings. Typically, text such as source code or English is compressed into 40-50% of the original size, and large files usually compress much better than small ones. Compression and decompression speed is generally much faster than that achieved by gzip, but compression ratio is worse.

COMPRESSION LEVELS
lzop offers the following compression levels of the LZO1X algorithm: the default level offers pretty fast compression. Note that -2, -3, -4, -5 and -6 are currently all equivalent - this may change in a future release. can be even a little bit faster in some cases - but most times you won't notice the difference these compression levels are mainly intended for generating pre-compressed data - especially -9 can be somewhat slow Decompression is very fast for all compression levels. If no other command is given then lzop defaults to compression. Regulate the speed of compression using the specified digit #, where -1 or --fast indicates the fastest compression method (less compression) and -9 or --best indicates the slowest compression method (best compression). The default compression level is -3. Decompress. Each file will be placed into same the directory as the compressed file. Extract compressed files to the current working directory. This is the same as `-dNp'. Test. Check the compressed file integrity. For each compressed file, list the following fields: method: compression method compressed: size of the compressed file uncompr.: size of the uncompressed file ratio: compression ratio uncompressed_name: name of the uncompressed file In combination with the --verbose option, the following fields are also displayed: date & time: time stamp for the uncompressed file With --name, the uncompressed name, date and time are those stored within the compress file if present. With --verbose, the size totals and compression ratio for all files is also displayed. With --quiet, the title and totals lines are not displayed. Note that lzop defines compression ratio as compressed_size / uncompressed_size. List each compressed file in a format similar to ls -ln. The following flags are currently honoured: F Append a `*' for executable files. G Inhibit display of group information. Q Enclose file names in double quotes. For each compressed file, list the internal header fields. Display information about the system and quit. Display the lzop license and quit. Display a help screen and quit. Version. Display the version number and compilation options then quit. Version. Display the version number then quit. Note that -t has priority over -d, -l over -t, and so on. Write output on standard output. If there are several input files, the output consists of a sequence of independently (de)compressed members. To obtain better compression, concatenate all input files before compressing them. Write output to the file FILE. If there are several input files, the output consists of a sequence of independently (de)compressed members. Write output files into the directory DIR instead of the directory determined by the input file. If DIR is omitted, then write to the current working directory. Force lzop to - overwrite existing files - compress from stdin even if it seems a terminal - compress to stdout even if it seems a terminal - allow option -c in combination with -U Using -f two or more times forces things like - compress files that already have a .lzo suffix - decompress files that do not have a valid suffix - try to handle compressed files with unknown header flags Use with care. Do not store or verify a checksum of the uncompressed file when compressing or decompressing. This speeds up the operation of lzop a little bit (especially when decompressing), but as unnoticed data corruption can happen in case of damaged compressed files the usage of this option is not generally recommended. Also, a checksum is always stored when compressing with one of the slow compression levels (-7, -8 or -9). When decompressing, do not restore the original file name if present (remove only the lzop suffix from the compressed file name). This option is the default under UNIX. When decompressing, restore the original file name if present. This option is useful on systems which have a limit on file name length. If the original name saved in the compressed file is not suitable for its file system, a new name is constructed from the original one to make it legal. This option is the default under DOS, Windows and OS/2. When decompressing, do not restore the original mode (permissions) saved in the compressed file. When decompressing, do not restore the original time stamp saved in the compressed file. Use suffix .suf instead of .lzo. The suffix must not contain multiple dots and special characters like '+' or '*', and suffixes other than .lzo should be avoided to avoid confusion when files are transferred to other systems. Do not delete input files. This is the default. Delete input files after succesfull compression or decompression. Beware. Use this option to make lzop behave like gzip. Note that -k overrides -U. Do not try to read standard input. This option is necessary in cron jobs (which do not have a controlling terminal). A file name "-" will still override this option. Suppress all warnings. Suppress all warnings, and never exit with exit status 2. Suppress all warnings and decrease the verbosity of some commands like --list or --test. Verbose. Display the name for each file compressed or decompressed. Multiple -v can be used to increase the verbosity of some commands like --list or --test. Specifies that this is the end of the options. Any file name after -- will not be interpreted as an option even if it starts with a hyphen. Do not use any color escape sequences. Assume a mono ANSI terminal. This is the default under UNIX. Assume a color ANSI terminal or try full-screen access. This is the default under DOS and in a Linux virtual console. Try to display that nice intro sequence then quit. Needs full-screen access. Rarely useful. Preprocess data with a special "multimedia" filter before compressing in order to improve compression ratio. NUMBER must be a decimal number from 1 to 16, inclusive. Using a filter slows down both compression and decompression quite a bit, and the compression ratio usually doesn't improve much either... More effective filters may be added in the future, though. You can try --filter=1 with data like 8-bit sound samples, --filter=2 with 16-bit samples or depth-16 images, etc. Un-filtering during decompression is handled automatically. Deprecated. Only for compatibility with old versions as lzop now uses a checksum by default. This option may get removed in a future release. lzop allows you to deal with your files in many flexible ways. Here are some usage examples: create lzop a.c -> create a.c.lzo lzop a.c b.c -> create a.c.lzo & b.c.lzo lzop -U a.c b.c -> create a.c.lzo & b.c.lzo and delete a.c & b.c lzop *.c extract lzop -d a.c.lzo -> restore a.c lzop -df a.c.lzo -> restore a.c, overwrite if already exists lzop -d *.lzo list lzop -l a.c.lzo lzop -l *.lzo lzop -lv *.lzo -> be verbose test lzop -t a.c.lzo lzop -tq *.lzo -> be quiet create lzop < a.c > y.lzo cat a.c | lzop > y.lzo tar -cf - *.c | lzop > y.tar.lzo -> create a compressed tar file extract lzop -d < y.lzo > a.c lzop -d < y.tar.lzo | tar -xvf - -> extract a tar file lzop -d < y.tar.lzo | tar -tvf - -> list a tar file list lzop -l < y.lzo cat y.lzo | lzop -l test lzop -t < y.lzo cat y.lzo | lzop -t create lzop -c a.c > y.lzo extract lzop -dc y.lzo > a.c lzop -dc y.tar.lzo | tar -tvf - -> list a tar file create lzop a.c b.c -o sources.lzo -> create an archive lzop -c *.c > sources.lzo -> another way to create an archive lzop -c *.h >> sources.lzo -> add files to archive extract lzop -dN sources.lzo lzop -x ../src/sources.lzo -> extract to current directory lzop -x -p/tmp < ../src/sources.lzo -> extract to /tmp directory list lzop -lNv sources.lzo test lzop -t sources.lzo lzop -tvv sources.lzo -> be very verbose If you wish to create a single archive file with multiple members so that members can later be extracted independently, you should prefer a full-featured archiver such as tar or zip. The latest version of GNU tar supports the --use-compress-program=lzop option to invoke lzop transparently. lzop is designed as a complement to tar, not as a replacement. The environment variable LZOP can hold a set of default options for lzop. These options are interpreted first and can be overwritten by explicit command line parameters. For example: for sh/ksh/zsh: LZOP="-1v --name"; export LZOP for csh/tcsh: setenv LZOP "-1v --name" for DOS: set LZOP=-1v --name On Vax/VMS, the name of the environment variable is LZOP_OPT, to avoid a conflict with the symbol set for invocation of the program. Note that not all options are valid in the environment variable - lzop will tell you. gzip(1), tar(1), bzip2(1) Precompiled binaries for some platforms should be available from the lzop home page soon. see http://wildsau.idv.uni-linz.ac.at/mfx/lzop.html lzop uses the LZO data compression library for compression services. see http://wildsau.idv.uni-linz.ac.at/mfx/lzo.html Exit status is normally 0; if an error occurs, exit status is 1. If a warning occurs, exit status is 2. lzop's diagnostics are intended to be self-explanatory. Please report all bugs immediately to the author. markus.oberhumer@jk.uni-linz.ac.at lzop and the LZO library are Copyright (C) 1996, 1997, 1998 by Markus Franz Xaver Johannes Oberhumer. lzop and the LZO library are distributed under the terms of the GNU General Public License (GPL).