Test::Harness - run perl standard test scripts with statistics use Test::Harness; runtests(@test_files); STOP! If all you want to do is write a test script, consider using Test::Simple. Otherwise, read on. (By using the Test module, you can write test scripts without knowing the exact output this module expects. However, if you need to know the specifics, read on!) Perl test scripts print to standard output "ok N" for each single test, where "N" is an increasing sequence of integers. The first line output by a standard test script is "1..M" with "M" being the number of tests that should be run within the test script. Test::Harness::runtests(@tests) runs all the testscripts named as arguments and checks standard output for the expected "ok N" strings. After all tests have been performed, runtests() prints some performance statistics that are computed by the Benchmark module.

The test script output
The following explains how Test::Harness interprets the output of your test program. This header tells how many tests there will be. It should be the first line output by your test program (but its okay if its preceded by comments). In certain instanced, you may not know how many tests you will ultimately be running. In this case, it is permitted (but not encouraged) for the 1..M header to appear as the last line output by your test (again, it can be followed by further comments). But we strongly encourage you to put it first. Under no circumstances should 1..M appear in the middle of your output or more than once. Any output from the testscript to standard error is ignored and bypassed, thus will be seen by the user. Lines written to standard output containing "/^(not\s+)?ok\b/" are interpreted as feedback for runtests(). All other lines are discarded. "/^not ok/" indicates a failed test. "/^ok/" is a successful test. Perl normally expects the 'ok' or 'not ok' to be followed by a test number. It is tolerated if the test numbers after 'ok' are omitted. In this case Test::Harness maintains temporarily its own counter until the script supplies test numbers again. So the following test script print <<END; 1..6 not ok ok not ok ok ok END will generate FAILED tests 1, 3, 6 Failed 3/6 tests, 50.00% okay Anything after the test number but before the # is considered to be the name of the test. ok 42 this is the name of the test Currently, Test::Harness does nothing with this information. If the standard output line contains the substring " # Skip" (with variations in spacing and case) after "ok" or "ok NUMBER", it is counted as a skipped test. If the whole testscript succeeds, the count of skipped tests is included in the generated output. "Test::Harness" reports the text after " # Skip\S*\s+" as a reason for skipping. ok 23 # skip Insufficient flogiston pressure. Similarly, one can include a similar explanation in a 1..0 line emitted if the test script is skipped completely: 1..0 # Skipped: no leverage found If the standard output line contains the substring " # TODO" after "not ok" or "not ok NUMBER", it is counted as a todo test. The text afterwards is the thing that has to be done before this test will succeed. not ok 13 # TODO harness the power of the atom These tests represent a feature to be implemented or a bug to be fixed and act as something of an executable "thing to do" list. They are not expected to succeed. Should a todo test begin succeeding, Test::Harness will report it as a bonus. This indicates that whatever you were supposed to do has been done and you should promote this to a normal test. As an emergency measure, a test script can decide that further tests are useless (e.g. missing dependencies) and testing should stop immediately. In that case the test script prints the magic words Bail out! to standard output. Any message after these words will be displayed by "Test::Harness" as the reason why testing is stopped. Additional comments may be put into the testing output on their own lines. Comment lines should begin with a '#', Test::Harness will ignore them. ok 1 # Life is good, the sun is shining, RAM is cheap. not ok 2 # got 'Bush' expected 'Gore' Any other output Test::Harness sees it will silently ignore BUT WE PLAN TO CHANGE THIS! If you wish to place additional output in your test script, please use a comment.

Taint mode
Test::Harness will honor the "-T" in the #! line on your test files. So if you begin a test with: #!perl -T the test will be run with taint mode on.

Configuration variables.
These variables can be used to configure the behavior of Test::Harness. They are exported on request. The global variable $Test::Harness::verbose is exportable and can be used to let runtests() display the standard output of the script without altering the behavior otherwise. The global variable $Test::Harness::switches is exportable and can be used to set perl command line options used for running the test script(s). The default value is "-w".

Failure
It will happen, your tests will fail. After you mop up your ego, you can begin examining the summary report: t/base..............ok t/nonumbers.........ok t/ok................ok t/test-harness......ok t/waterloo..........dubious Test returned status 3 (wstat 768, 0x300) DIED. FAILED tests 1, 3, 5, 7, 9, 11, 13, 15, 17, 19 Failed 10/20 tests, 50.00% okay Failed Test Stat Wstat Total Fail Failed List of Failed ----------------------------------------------------------------------- t/waterloo.t 3 768 20 10 50.00% 1 3 5 7 9 11 13 15 17 19 Failed 1/5 test scripts, 80.00% okay. 10/44 subtests failed, 77.27% okay. Everything passed but t/waterloo.t. It failed 10 of 20 tests and exited with non-zero status indicating something dubious happened. The columns in the summary report mean: The test file which failed. If the test exited with non-zero, this is its exit status. The wait status of the test umm, I need a better explanation here. Total number of tests expected to run. Number which failed, either from "not ok" or because they never ran. Percentage of the total tests which failed. A list of the tests which failed. Successive failures may be abbreviated (ie. 15-20 to indicate that tests 15, 16, 17, 18, 19 and 20 failed).

Functions
Test::Harness currently only has one function, here it is. my $allok = runtests(@test_files); This runs all the given @test_files and divines whether they passed or failed based on their output to STDOUT (details above). It prints out each individual test which failed along with a summary report and a how long it all took. It returns true if everything was ok, false otherwise. &runtests is exported by Test::Harness per default. $verbose and $switches are exported upon request. If all tests are successful some statistics about the performance are printed. For any single script that has failing subtests statistics like the above are printed. Scripts that return a non-zero exit status, both "$? >> 8" and $? are printed in a message similar to the above. If not all tests were successful, the script dies with one of the above messages. If a single subtest decides that further testing will not make sense, the script dies with this message. Harness sets this before executing the individual tests. This allows the tests to determine if they are being executed through the harness or by any other means. This value will be used for the width of the terminal. If it is not set then it will default to "COLUMNS". If this is not set, it will default to 80. Note that users of Bourne-sh based shells will need to "export COLUMNS" for this module to use that variable. When true it will make harness attempt to compile the test using "perlcc" before running it. NOTE This currently only works when sitting in the perl source directory! When set to the name of a directory, harness will check after each test whether new files appeared in that directory, and report them as LEAKED FILES: scr.tmp 0 my.db If relative, directory name is with respect to the current directory at the moment runtests() was called. Putting absolute path into "HARNESS_FILELEAK_IN_DIR" may give more predictable results. Makes harness ignore the exit status of child processes when defined. When set to a true value, forces it to behave as though STDOUT were not a console. You may need to set this if you don't want harness to output more frequent progress messages using carriage returns. Some consoles may not handle carriage returns properly (which results in a somewhat messy output). Its value will be prepended to the switches used to invoke perl on each test. For example, setting "HARNESS_PERL_SWITCHES" to "-W" will run all tests with all warnings enabled. If true, Test::Harness will output the verbose results of running its tests. Setting $Test::Harness::verbose will override this. Here's how Test::Harness tests itself $ cd ~/src/devel/Test-Harness $ perl -Mblib -e 'use Test::Harness qw(&runtests $verbose); $verbose=0; runtests @ARGV;' t/*.t Using /home/schwern/src/devel/Test-Harness/blib t/base..............ok t/nonumbers.........ok t/ok................ok t/test-harness......ok All tests successful. Files=4, Tests=24, 2 wallclock secs ( 0.61 cusr + 0.41 csys = 1.02 CPU) Test and Test::Simple for writing test scripts, Benchmark for the underlying timing routines, Devel::CoreStack to generate core dumps from failed tests and Devel::Cover for test coverage analysis. Either Tim Bunce or Andreas Koenig, we don't know. What we know for sure is, that it was inspired by Larry Wall's TEST script that came with perl distributions for ages. Numerous anonymous contributors exist. Andreas Koenig held the torch for many years. Current maintainer is Michael G Schwern <schwern@pobox.com> Provide a way of running tests quietly (ie. no printing) for automated validation of tests. This will probably take the form of a version of runtests() which rather than printing its output returns raw data on the state of the tests. (Partially done in Test::Harness::Straps) Fix HARNESS_COMPILE_TEST without breaking its core usage. Figure a way to report test names in the failure summary. Rework the test summary so long test names are not truncated as badly. Deal with VMS's "not \nok 4\n" mistake. Add option for coverage analysis. HARNESS_COMPILE_TEST currently assumes its run from the Perl source directory.